When I push the brake pedal the front end shakes ?
If you put new rotors you need new brakes as well the other thing to check is the inner and outer tie rods to do that get the front tires off the ground grab the front and back of the tire on the tread have someone look at the inner and outer tie rods as you move the tire back and forth if the tie rod does not move it is wore out you can also look at the sway bar pins and make sure that they are not broken
SOURCE: My Silverado front end wobbles at any speed, not affected braking
Couple of checks , mud in front rims will give you a wobble. Front tire cord seperation or loose wheel nuts. , Wore out tie rod end, front wheel bearing play, or a weight has fallen off the rim and it needs balancing. If it is vibrating your steering wheel, have the front end looked at right away.
SOURCE: Brake pedal pulsates when appling brakes
If the new rotors were not allow to seat after replacement they will warp extremely easily. Easy to check. Remove wheel and check for trueness of rotor, a dead give away is if you see a blueish tint on the rotor.
SOURCE: Front end noise
Sounds like rust build up on the rotors,this is a common problem with after market rotors,or it is a squealer tab and they squeal to warn you before damage is done to the rotors when brake pads are 2/3 worn down.have a brake inspection done.
SOURCE: 2001 chevy silverado brake lights stay on, when
It sounds like there is a wire shorted out or grounding through your brake lights, I would start by looking at the wires that lead to the trailer light plug by the rear bumper.
SOURCE: i replaced the brake light switch on my 1994 chevy
it should be adjustable the switch should touch the pedal arm just enough to make light come on that way the slightest tap on the brakes make lights come on.
Testimonial: "Thank You "
278 views
Usually answered in minutes!
×