Checked the vehicle for spark.no spark had a scan done cam sen code came up.replace cam sen got spark back but now no injector pulse any ideas?
Check at the area of where the belt snapped what sensors and plugs and wiring could be affected. Most probably either a broken wire or broken or unplugged any connector.or any sensitive sensor has been damaged.
SOURCE: 2000 kia sportage. no start no spark no injector pulse.
check both of your fuse panels for a blown fuse. there's 4-5 that control the fuel pump, engine sensors, fuel injectors and such. one of those may be blown and not letting the rest of the system function. one panel is located under hood, and one is under the dash on drivers side. when you take the covers off they have the fuses numbered and tell what they control.
SOURCE: 2003 Kia sorento starts and then won't start
change your fuel filter. it seems youve done all the major actions but havent tried the common fix.
SOURCE: 2004 Kia Optima no start after timing belt, crank, cam sensor replacement
did you use aftermarket crank sensor? if so that might be your problem. dealer has several different ones, by providing vin number, but there is only one after market for all optimas 01-05. try to connect thick pink wire and thick orange wire together on the ignition failure sensor. you might have the same problem as me. good luck.
86 views
Usually answered in minutes!
×