Question about 1999 Saturn SL
WHAT IS SPARK PLUG GAP FOR 1999 SATURN SL2?
I hope you haven't taken all the wires off and now trying to figure out how they went? You need to do one at a time, match up the length and plug it in. If you took them off, you will need the firing order, and then figure out the coil pac. All cars engines have the number one cylinder towards the front most part of the engine, whether right or left side, front is No. 1. The firing order is stamped into the engine block, probably where you can't see it. But you can find it on line easy enough, and the coil pac usually starts at 1,2,, then 3,4,, then 5,6, etc, 2 plugs per coil, You will have to find that on line also. then just find the closest match in length and plug them in, you might end up moving one or 2 because of the length, but that's ok. Hope this helps.
Posted on Jul 18, 2010
.060 of an inch is what it calls for however here is more info you should probably read and make your own judgement. http://www.magnecor.com/magnecor1/techbulletins/techsat.htm
Posted on Jun 24, 2012
Tips for a great answer:
Nov 18, 2015 | Saturn Cars & Trucks
Jun 23, 2012 | Saturn SL2 Cars & Trucks
Dec 28, 2011 | 1999 Saturn SL
Apr 13, 2011 | 1993 Saturn SL2
May 16, 2010 | 1999 Saturn SL
May 10, 2010 | 1998 Saturn SL
Feb 22, 2010 | 1999 Saturn SL
Nov 10, 2009 | 1999 Saturn SL
Feb 18, 2009 | 2001 Saturn SC
104 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: