OK, your fuel indicator is wired to a sending unit that is located inside the fuel tank. this assembly is part of the fuel pump assembly. the fuel indicator sending unit is housed in the same assembly as the fuel pump. The fuel indicator will not function properly if there is a bad ground or, if there is a fault within the sending unit. there is a floater device attached on this assembly and, it raises with the fuel level and lowers when the fuel level is low, sending resistance signals to the indicator gauge on your dash board. these signals can be disrupted if the ground is corroded or, if the sending unit is damaged. In most cases, replacing the sending unit will fix this issue. if the fuel indicator is stuck on the full mark, check the ground. if the fuel gauge is laying on empty all the time, replace the sending unit.
905 views
Usually answered in minutes!
×