93 BUICK both front doors not opening from outside but do work from the inside

SOURCE: 93 buick adjusted door handle now won't open in or outside

let down the window, take a chain with a hook on it ,hook it on to the  handle and if your strong enough pull the chain hard and hold it from the inside and once again if your strong enough turn around and give it a bruce lee with boots on. be careful to put a few towels between the chain and the finish you don't want to wear the solution afterward.

SOURCE: 1993 Buick Regal front doors will not open

if you got acess to a sim jim you can get them open with that, but if you don't know how to use one it best to get someone who does. i know if you call the police they will come out and unlock it for you. if they won't than most body shops have one, and they can open it for you, most likely at a cost, where the police will do it for nothing. as far as fixing once you get them open, most all major auto parts stores have web sites with step by step instructions and exploded views.

SOURCE: 1994 regal custom door

R/F door trim will have to be removed. Most likely you will find linkage disconnected from the inside latch of the outside door handle. You might even find a broken piece of the door handle requiring replacement

SOURCE: I went to open the driver side door and the

the door handle is either broke or a part of it has slipped loose, either way, you'll have to remove the inner door panel to get to it, this is not difficult, a few screws and the panel is retained by push in type plugs that can be pryed loose. the entire door latch assy is held in by screws and is serviced by replacement, the difficulty come with very tight area to work in, and is irritating and time consuming, if you are not good with tools i'd suggest a good mechanic or body shop. always get a quote!!

SOURCE: I have a '93 Buick Regal Custom. Last year I was

I have this problem every year with my car, 1993 buick regal custom, 3.8. What happens is it gets cold, warms up a bit, and ice or snow melts and gets in the door, then it gets cold again and it freezes. I go to unlock and open the door from the outside and this problem arises.

There is a vertical rod on the left side of the drivers side, right side of the passenger side, that gets bent, from trying to open the door when that mechanism is frozen up. Just bend it back, a TINY bit and it will start working.

I got tired of taking my door apart every time it happened so i cut a little "door" in the cover thing, so i can get at that bar.

I also tried coating it in grease and that seems to lessen the frequency.