Question about 1992 Honda Civic

1 Answer

Need spark plug wire diagram for 1998 civic 4dr lx

Need a pic that shows spark plug wires installed, think i have one out of order.

Posted by David Scott on

Ad

1 Answer

Stephen

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Honda Master
  • 21,873 Answers

Courtesy Justanswer.com

need spark plug wire diagram for 1998 civic 4dr lx - 4a90ef84-7689-414d-a1ab-1bd894fa2585.gif

Posted on Feb 17, 2014

Ad

3 Related Answers

Curt Downs

  • 1779 Answers

SOURCE: 1995 Honda Civic Spark Plug Wiring

The spark plugs are numbered starting on the drivers side (1) to the passenger side (4), the distributor rotates clockwise, and the firing order is 1 - 3 - 4 - 2

Posted on Oct 18, 2008

Ad
ZJLimited

ZJ Limited

  • 17970 Answers

SOURCE: where can I get wiring diagram for 92 Honda Civic

Here several documents:

cb2ce2a.gif

Engine wiring-1992-95 Civic (except VX)

0ede761.gif

Engine wiring-1992-95 Civic VX

b88a19f.gif

Chassis wiring-1992-95 Civic, 1993-95 del Sol


06b1ea6.gif

Chassis wiring-1992-95 Civic, 1993-95 del Sol


Good luck... remember rated this help.

Posted on Aug 19, 2009

billandjo313

  • 22 Answers

SOURCE: honda civic vtec 1995 - 1998 engine wiring diagram

Go to your local library and ask the Librarian to get you on-line to the Automotive Repair Reference Center, and then to the EBSCO database...you will find all of your wiring diagrams there.

Posted on Oct 07, 2009

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Change spark plugs


  1. Disconnect the spark plug wire at each spark plug.
    • Twist each spark plug 1/2 turn.
    • Pull only on the boot in order to remove the wire from each spark plug.
  1. Disconnect the spark plug wire from the ignition coil.
    • Twist each spark plug boot 1/2 turn.
    • Pull only on the boot in order to remove the wires from the ignition coil
  • Install the spark plug wires at the ignition coil.
  • Install the spark plug wire to each spark plug.
  • Inspect the wires for proper installation:
  • Repeat above procedure for all 8 cylinders.
  • Jun 17, 2013 | 2003 Hummer H2

    1 Answer

    Installing Spark plug wires


    Unless the wires were removed the firing order cannot change as also the length of the wires do not permit that the wires switch over.
    All what is needed is to check the spark at each plug , if of low internsity check the ignition system including the HT coil. Also the fuel filter and the fuel pump for the right pressure.

    Nov 22, 2011 | 1996 Honda Accord

    1 Answer

    I need the diagram to put the spark plug cables


    2003 Chevrolet Malibu 3.1L SFI OHV 6cyl
    Spark Plug Wires - Removal & Installation

    3.5L Engine
    1. Before servicing the vehicle, refer to the Precautions Section.
      NOTE Twist the spark plug boot one-half turn in order to release the boot. Pull on the spark plug boot only. Do not pull on the spark plug wire or the wire could be damaged.
    2. Remove the intake manifold cover, if required.
    3. Disconnect the left side spark plug wires from the spark plugs.
    4. Disconnect the left side spark plug wires from the ignition coil.
    5. Remove the spark plug wire clips from the Manifold Absolute Pressure (MAP) sensor bracket and the heater inlet and outlet pipe tab.
    6. Remove the spark plug wire assembly.
    7. If replacing only one plug wire, open the retaining clips and remove the appropriate spark plug wire.
    8. Disconnect the right side spark plug wires from the spark plugs.
    9. Disconnect the right side spark plugs from the ignition coils.
    10. Remove the spark plug wire assembly.
    11. If replacing only one plug wire, open the retaining clip and remove the appropriate spark plug wire.
    To install:
    1. Install the spark plug wire assembly.
    2. Connect the right side spark plugs to the ignition coils.
    3. Connect the right side spark plug wires to the spark plugs.
    4. If replacing only one plug wire, open the retaining clip and install the appropriate spark plug wire.
    5. Install the spark plug wire assembly.
    6. Connect the left side spark plug wires to the spark plugs.
    7. Connect the left side spark plug wires to the ignition coil.
    8. Install the spark plug wire clips to the MAP sensor bracket and the heater inlet and outlet pipe tab.
    9. If replacing only one plug wire, open the retaining clips and install the appropriate spark plug wire.
    10. Install the intake manifold cover, if required.

    Fig. 2.2L Engine Firing Order: 1-3-4-2 Distributorless ignition system
    74d742b.jpg


    Fig. 3.1L Engine Firing order: 1-2-3-4-5-6 Distributorless ignition system
    306b531.jpg


    Fig. 3.5L Engine Firing order: 1-2-3-4-5-6 Distributorless ignition system
    9313fa7.jpg


    Fig. 2.4L Engine Firing order: 1-3-4-2 Distributorless ignition system
    2c9af72.jpg


    Fig. 3.1L Engine Firing order: 1-2-3-4-5-6 Distributorless ignition system
    d929c16.jpg


    Fig. 2.2L Engine Firing Order: 1-3-4-2 Distributorless ignition system
    f357cd3.jpg

    Fig. 3.5L & 3.9L Engines Firing order: 1-2-3-4-5-6 Distributorless ignition system
    09e9db9.jpg

    I really hope help you with this (remember rated this help) Good luck.

    Sep 23, 2009 | 2003 Chevrolet Malibu

    1 Answer

    I am trying to install spark plug wires on my 1994 Chevy C1500 Truck but I can't remember the order. Can you help?


    what you need is the firing order. that is located on the intake of the vechile right in front of the throttle body. it starts at 1-8 then i forget the rest off hand. that number tells you what plug gets spark first. now, on your motor, the cylinders are numbered as such. front of motor drivers side to rear is 1,3,5,and 7. Passanger side front to rear is 2,4,6, and 8. Match up the cylinder and wire with the distrubitor starting at 1, then 8, then so on and so on using your firing order. I found a pic online for you.
    http://www.classiccarauto.com/impala/how_to/images/distributor.png As you see in the pic it starts off with number 1 in the 6:30 position. I find that if you start in the 4:30 position it's almost dead on. But that's up to you. Hope this helps.

    Jun 14, 2009 | 1994 Chevrolet C1500

    1 Answer

    Need a diagram of the firing order of spark plug wires from coil packs to spark plugs


    FROM LEFT TO RIGHT, 5/2 3/6 4/1. ASSUMING YOU HAVE THE 3.1L ENGINE.

    May 31, 2009 | 1998 Chevrolet Lumina

    2 Answers

    Need wireing diagram for 2002 dodge grand caravan


    ------>>>FRONT>>>>of Van >>>>

    ______________________________
    #5 cyl #6 cyl

    #3 cyl #4 cyl

    #1 cyl #2 cyl
    ______________________________
    _________________
    I COIL BLOCK I
    I I
    I #3 #1 #5 I
    I I
    I I Firing Order Is
    I I 1 2 3 4 5 6
    I #6 #4 #2 I
    I _______________I_

    the Wires Go Accordingly to prospective Terminals, So Sorry Unable to Send Pics through FixYa, A Formating Problem Exists
    and they show on my end but not on your end this is TRUE and CORRECT To The BOOK other than the Lines from Coil to Spark Plug ENDS at CYLINDERS. Please dont Forget to RATE Me
    Thank You And Happy Motoring!!



    Mar 27, 2009 | 2002 Dodge Grand Caravan

    Not finding what you are looking for?
    1992 Honda Civic Logo

    891 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Honda Experts

    Marvin
    Marvin

    Level 3 Expert

    85239 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22485 Answers

    Jeffrey Turcotte
    Jeffrey Turcotte

    Level 3 Expert

    8984 Answers

    Are you a Honda Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...