1990 Buick Century Logo

Related Topics:

A
Anonymous Posted on Feb 14, 2014

Replace radio in 1990 buick century

I need to remove the dashboard to access the radio. How can I take the radio out?

5 Related Answers

alicantecoli

Colin Stickland

  • 22516 Answers
  • Posted on Nov 20, 2008

SOURCE: trying to remove radio from 1998 buick century

wow lot of work ,,normally just two holes either side or radio and push in a special tool and they pop out

Ad
emissionwiz

Marvin

  • 85242 Answers
  • Posted on Apr 06, 2009

SOURCE: Need to replace tail light bulb on 1996 Buick Century

Inside the trunk, under the carpet behind the tail lights will be a whole bunch of small plastic nuts, running from one side of the car to the other. Take all of these plastic nuts off, and the whole tail light assembly will come off in one large piece. Find the bulb you need to replace, and reassemble

Christopher Keene

  • 201 Answers
  • Posted on May 09, 2009

SOURCE: Steering wheel removal buick century 2002

look on back side of center cushion arms,there are fastners there that hold this peice on then rest is easy..

Anonymous

  • 176 Answers
  • Posted on May 18, 2009

SOURCE: need unlock code for 2003 buick century car radio

You will need to take the car to a dealership to have the service department unlock the radio for you. They have a special code to unlock the radio and then you are required to change the code to one that you will remember. An appointment should not be needed because this takes about 5 minutes. I do not remember the code, sorry.

Anonymous

  • 548 Answers
  • Posted on Aug 26, 2009

SOURCE: how do i replaced the dashboard light for the

this is a process and I would reccomend you get the manual either from your local library or that you buy one from your local autoparts or book store. you have to take the dash apart to do this and it is rather complicate and has many connectors hidden and othwerwise and the manual will help greatly

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How do I replace the dashboard light on 2003 buick century

you will probably find it easier if you just take out the clocks and unplug the loom from them then its just twist and turn the bulb out find a replacement and hey presto
1helpful
1answer

Where is the orfice filter on a 2000 buick century 3.0.

The a/c orifice tube is probably located at the firewall on the a/c piping that leads to the evaporator that sits behind the firewall and in front of the dashboard climate control.
0helpful
1answer

1990 Buick Century Wheel Cylinder

I would guess it is metric,as are most all bolts,except some large size chassis bolts,and have been since about 1983. You got rust issues also.
1helpful
1answer
0helpful
1answer

How do you remove the trim around the factory

Unfortunately it has been a few years since I've removed the dash in my sisters 95 century(same setup as yours)... but I came across something that should give you some decent pointers.

http://www.pdfee.com/autos-how-to/99-4544-installation-instructions

that is a link to a pdf, which, on Page 3 gives a basic text description of what you need to remove in order to get the dash trim off and gain access to the radio. If that link does not work, here's the link the page from which you can download the above mentioned file also...

http://www.pdfee.com/99-4544-installation-instructions.html
0helpful
1answer

Antenna on 1990 Buick Century doesn't work stays down

antenna operation happens when radio is turned on,so I would look at the radio fuse first,other than that look for ant. fuse
8helpful
1answer

Locate crank sensor on 1990 buick century

Hello, the crank position sensor or (CPS) censor is located directly behind the harmonic balancer (or fly wheel at the very bottom). The sensor is located on the right side of the harmonic balancer when facing the front of the motor. You must remove the harmonic balancer to replace the sensor. You must also re-align the sensor with 30 thousands of an inch tolorence, or your car may idle rough or may not start. I own a 1990 Buick Century and just replaced my CPS sensor last month. There is a trick I learned to reinstalling the new sensor. Let me know if you need that information.
0helpful
1answer

Flasher out on buick and cannot find location to replace it

Open access panel directly under steering column, pull off flasher unit (metallic cylinder) take to auto parts store (no more than 10 bucks) , put on new one, drive safe.

Good Luck and please don't forget to rate!
4helpful
2answers

My dashboard has no lights

Are all the lights in the dash out? if not, it is the bulb, the bad news is you have to remove the instrument cluster to replace the bulbs, there is no access from the rear that allows you to get your hand in there.
2helpful
2answers

1990 buick centruty, driver door schematic (window regulator)

The first thing you need to do before buying any parts is to remove the door panel and find out exactly what is wrong, the motor is a gear reduction unit and even if the motor works it may still not drive the output gear. The door panel is held on by screws and hidden clips, pop off any panels or light fixtures on the door trim, under those you will find the hidden retainer screws, then gently pull door panel at edges to disengage feather style snaps.
Not finding what you are looking for?

85 views

Ask a Question

Usually answered in minutes!

Top Buick Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...