Question about 2005 Chevrolet Silverado 2500HD 2WD
These codes are for the evaporative emission system.The 455 is the vent solenoid.The 455 is a large leak in the evap.system.The vent solenoid I would replace because they go bad and will not work because they are under the vehicle in the rear of the truck.There is a bulletin for these and the vent valve is installed in another spot.The number for the bulletin is 02-06-04-037E.You should also look for a broken or loose hose or pipe that might have came off.Specially if you ran over something.If none found it could just be the vent solenoid stuck in the venting position.Good luck.
Posted on Dec 01, 2009
Clicking, especially while turning usually more so points to a problem with the CV joint, or axel, the easiest way to test a wheel baring is to jack up that side of the truck until the tire is off the ground, leave the lug nuts on and try to wobble the tire in all directions, if everything seems solid it is not likely the bearing casuse the sound, another note when a bearing starts to go bad, it usually hums opposed to clicks. Im sorry i dont have a diagram, but this proceedure should get you on the right track in diagnosing the issure, good luck!!
Posted on Mar 21, 2010
Tips for a great answer:
Oct 28, 2016 | 2005 Chevrolet Silverado
Oct 02, 2012 | 2004 Pontiac Grand Prix
Sep 02, 2011 | 2005 Chevrolet Silverado 1500 2WD
P0455....Evaporative Emission Control System Leak Detected (gross leak)
P0138....O2 Sensor Circuit High Voltage (Bank 1 Sensor 2)
Jan 13, 2011 | 2001 Dodge Ram 2500 Truck
Nov 09, 2009 | 2006 Kia Rio5
May 04, 2009 | 2003 Chevrolet Silverado 1500
Feb 21, 2018 | 2005 Chevrolet Silverado 2500HD 2WD
581 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: