Starts out good in 1st. and 2nd. slips in 3rd. and 4th. going down the road it will get up to speed .when you come to a small hill it drops right down to nothing and motor winnes
Sounds like the transmission is done. Time for a rebuild/replace.
SOURCE: my truck loses power
In most cases it is the fuel filter. I don't know when it was changed before, but it should be changed at least every 8-10 k miles. Make sure you change the air filter too.
SOURCE: 4l60e slips in 3rd and 4th
There are to many things that can cause this problem, best thing to is go get the ECM scanned for DTC codes at a transmission shop or Auto zone or Parts Source since they scan for free.
The ECM should have DTC code in it's memory on how the transmission is Performing and have the Transmission line tested for Fluid pressure.
Good luck and hope this helps. Oh and also ways check with more then on transmission shop if there tell you that you need a new Transmission,
It could be a simple as the transmission filter falling off causing the lost of transmission fluid pressure. Check the transmission fluid too.
SOURCE: transmisson problems
it can be the shift solenoid in the trans there is one for 1st and 2nd then there is one for 3rd and fourth easy to change drop pan they are right there.about 40 to 60 at dealer for solenoid and of course fluid and filter about 60.00
SOURCE: my 88 chevy with 700r4 wont upshift from 3rd to 4th
you have a valve body problem, some of the speed sonsor controls are malfunctioning... need to get into the valve body... check fluid condition for dirty and burned condition...
SOURCE: 96 chevy blazer 3rd gear and overdrive slipping
i got a 1996 chev. blazer s-s10 4.3 engine 4x4.problem i got is i got 1st 2nd & overdrive & reverse but no 3rd gear what should i do
141 views
Usually answered in minutes!
×