1990 Isuzu Trooper Logo

Related Topics:

Walter Aguilon Posted on Feb 05, 2014

Code 12 usuzu trooper - 1990 Isuzu Trooper

1 Answer

Don Bost

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

  • Contributor 1 Answer
  • Posted on Mar 03, 2014
Don Bost
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Joined: Mar 03, 2014
Answers
1
Questions
0
Helped
313
Points
2

Code 12 is the hand shake code on most troopers. will be repeated three times. then each code will repeat its self three times. when all codes are flashed it will return to the 12 code. reference 1990 Isuzu trooper

  • Don Bost
    Don Bost Mar 03, 2014

    code 12 is the hand shake code on most troopers. will be repeated three times. then each code will repeat its self three times. when all codes are flashed it will return to the 12 code. reference 1990 Isuzu trooper

  • Don Bost
    Don Bost Mar 03, 2014

    code 12 is just a hand shake code. basic says hi im here and reading codes. will repeat 3 times

×

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

I have a 1995 Isuzu Trooper and am getting the diagnostic code Flash... Flash,Flash. I believe thet means 12. Does that mean solenoid circuit failure? And if so, what do I need to do to fix my rig?

When you flash codes on a 95 trooper..it should flash code 12 pause and flash code 12 two more times...if no other codes flash it means there are no codes stored...code 12 is basically, enter codes, beginning of codes and end of codes.
I just double checked cos 95 models were I thought allrunning the obd 2systems..but production dates after the 8th month are considered next year models..so maybe yours is a late year production. I am going to send a picture and pre odb2 code 12 is a code..hope this helps!

cb567c1e-593f-4730-8d17-6a3b53068fe8.png
1helpful
1answer

What does this code mean? No tach signal to ECM - No Distributor Reference Pulses{4}

ISUZU INFORMATION AND LINKS - Front Range 4x4 Forums

www.frontrange4x4.com > Forum > Tech Topics > Make & Model Links
Apr 7, 2008 - 8 posts - ‎2 authors 12 No tach signal to ECM - No Distributor Reference Pulses{4} ... solenoid circuit failure - 1987 and 1995 Amigo/Pick-up, 1989 to 1994 V6 models ... {9}-Amigo, Pickup,Rodeo & Trooper w/2.6L engine & 1988-91 Impulse.
0helpful
1answer

How to charge 2001 trooper ac from no pressure

You can't. R-12 is no longer legal to use.
0helpful
1answer

What are codes p0401 and p0300 mean on a 2000 isuzu trooper

P0401 is EGR problem
P0300 is a cylinder 3 misfire.
Replace EGR valve and do a full tune-up.
1helpful
1answer

Transmission leak Isuzu Trooper

Tighten then in an X pattern working outward to about 12 foot pounds. Do not over-tighten, use a rubber/cork composite gasket if available.
2helpful
1answer

When using a jumper wire to retrieve ABS trouble codes on a 2002 Trooper 4 wheel drive how is the DLC numbered? I mean which pins do I jump? And when I do jump, Will the ABS light flash te codes....

ok, there are 16 pins in the DLC you want to jump #4 and #12 as you look at the connector from left to right top row is 1-8 bottom row from left to right 9-16, both rows the 4th pin jump them together. then count the flashes all codes are 2 diget ( example flash-flash pause flash-flash = code 22 )
1helpful
1answer

2004 isuzu trooper changed fly wheel how do you time it up

If its a manual then the small half moon cut out goes at 6 o'clock to the crank being on #1 tdc and if its auto the opposite - 12 o'clock.
0helpful
2answers

2000 trooper wont start!!! pulled it in the driveway shut it off then wen't to leave and wouldn't start. i changed the starter relay and still nothing. makes a clicking noise and that is it. is there a...

Sounds like the starter solenoid is working, but the starter motor isn't. If you have a voltmeter or test light, measure for light/12 volts at the motor terminal while someone tries the key. If the solenoid is what is 'clicking', but nothing at the motor terminal, change the solenoid. If you get light/12 volts, then the motor itself is in trouble.
3helpful
2answers

4x4 light is flashing (TOD indicator)

this means there is a problem if it continuosly flashes
Short-circuit terminal 8 of the self-diagnostic
connector to GND to display the trouble code on the
CHECK lamp.
If no trouble codes exist, code “12” is displayed continuously.
If trouble codes exist, code “12” is displayed three times, and then other trouble codes, starting from the smaller code number, these are displayed three times respectively.

this is located behind right front centre console side trim..
2eb44e9.jpg
1helpful
1answer

Color code for my isuzu trooper 1993 3.1

look on the door and there is a 3 digit number for paint code and a 3 diget number for the trim code.
Not finding what you are looking for?

323 views

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...