Question about Honda Cars & Trucks

2 Answers

Honda stream 2009 'D' blinking light. diagnostic says po843 code

Posted by Paula Jones-Campbell on

Ad

2 Answers

Fahad Malik

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Hy I have 2009 Honda Accor is d light is braking I chang oil two

Posted on May 24, 2019

Ad

_-__-___-_

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Honda Master
  • 20,706 Answers

Take it in, get it fixed ? stream?) not sold here, so alldata.com has nada.
or if DIY person
RTM , read the manual the FSM. its all there, look up 843
it tells you all the tests to do , that isolates the true cause of failure.

D flash means the tranny TCM is unhappy.
the CEL glowing too.
the P0843 means.
Data:
P0843: Open in Transmission Fluid Pressure Switch A (2nd Clutch) Circuit, or Transmission Fluid Pressure Switch A (2nd Clutch) Stuck OFF

first google hit.
http://www.civicforums.com/forums/181-8th-9th-gen/351431-engine-ligh-flashing-d-p0843-what-do-next.html#post4616790

Posted on Feb 05, 2014

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Amber braking light on Honda civic hybrid 2009 is showing


Have you checked the brake fluid in the master cylinder?

Dec 22, 2014 | 2009 Honda Civic

1 Answer

After driving a bit the "d" drive indicator starts flashing on my 2009 CSX. Diagnostics indicate P0843 code. What is this?


code p0843 refers to transmission fluid pressure (TFP) sensor A --high input===causes --wiring ---short to positive --TFP sensor---ECM/TCM
replace the sensor .

Dec 14, 2013 | 2003 Honda CR-V

1 Answer

The s light comes on and car will not start while it is on


"S" usually refers to the speed sensor This sensor translates your MPH and RPM . If the tranny is behaving erratically, try to troubleshoot by pulling the codes from the on board diagnostic unit (You can usually do this with a paper clip after you locate where the connector is located). Refer to Honda codes for your model They will blink on your dashboard and you count the number of blinks that correspond to the Honda engine code. the "S" light is sort of like the check engine light, except it refers to tranny problems only....there is a cable speed sensor cable, that is attached to the top of your tranny and runs to the back of the odometer.

Feb 16, 2013 | 1991 Honda Accord

1 Answer

2009 civic p1298


battery has a dead sell u need a new battery

Jan 18, 2013 | 2009 Honda Civic 1.8

1 Answer

What does diagnostic code A136 for 2009 Honda Pilot means?


What does service code A136 for a 2009 Honda Pilot mean?

Feb 26, 2012 | 2009 Honda Pilot

1 Answer

I need Code for my Honda Stream Radio cassette player.


call the dealer they will ask you for vin number and if you are the owner and they have the code

Jan 25, 2011 | 2009 Honda Odyssey

2 Answers

Car almost didnt start then s light blinked the


Hi,

The 'S' light is also your diagnostic indicator....so, the answer lies in the 'sequence' which the S light blinks.

Codes:

Long blinks: 1st digit
short blinks: 2nd digit

e.g.1 - if there are 6 short blinks (followed by long pause) then repeats 6 blinks again, the code = 6.

e.g.2 - if there is 1 long blink, then 4 short blinks (followed by long pause) then repeats again, the code = 14.

The ECU may show more more than one code.

Once you determine the correct code/s, post them here so someone can assist you further.

Cheers,

Aug 12, 2009 | 1991 Honda Accord

4 Answers

1994 honda accord


The D4 light blinking indicates there is a diagnostic trouble code stored.When a malfunction occurs,the vehicle computer records the code and stores it,then flashes the D4 light to let you KNOW there is a problem.On pre OBD 2 Honda vehicles,1995 and back,Hondas are manual code read,which means you do NOT hook up a scan tool as there is no scan port.The passenger side front kick panel is removed,and a blue 2 wire connector located.Use a jumper wire to short out the connector,then turn the ignition key on,with engine off,not running.This throws the computer into self diagnostic mode,and the D4 or "s" light will flash a series of flashes.The flashes have to be counted,and written down.For example,2 flashes followed by 4 flashes would be a code 24.The code is then looked up with reference material for a description and diagnostic route.Every diagnostic trouble code,has a diagnostic route,for repairing the problem.Again,this informtion,the diagnostic route,is available in reference material from pay sources like All Data Online.After the repair is made,the battery is disconnected to clear the code.Good luck.

Jul 30, 2008 | 1994 Honda Accord

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

1,152 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...