I'm having problems with my 2008 Chrysler 300 touring not starting.I took the key fob and blewit out and it started,took key fob out and next time I put it in it wouldn't start again.once again blew it out with air and then it started.as long as I leave the key fob in ignition it starts everytime,but if I remove it,it won't start.any ideas on what it could be?tried replacing battery in fob already
If it happens to be one with a chipped key that is where I would start replacing it
SOURCE: 2001 Chrysler starting problem
fuses are'nt linked to startor that's a relay as I have mine ran to a car-PC with voice start. ANyhow you would need to look up in owners book fuse location chart. What fuse socket that keeps blowing runs to, my guess is it blows before you start car as soon as your ignition goes to accessory then it kicks on that fuse bank. DO NOT STICK BIGGER FUSE IN AS THIS COULD CAUSE FIRE. first find out what that fuse controls.. is it the fuel system, radio, PCM ect.. could be a ignition fuse but these tend to be bigger what size is the fuse you blow?
SOURCE: 95 F150 wont crank
the starter should be replaced. The solenoid is kikcing the pinion out but there is no contact being made to turn the starter motor. I have the exact same truck and before i changed the starter used the old starter tap trick. Tap the starter casing with a hammer and it should start turning again. hope this was helpful for you. Good luck.
SOURCE: 2008 Chrysler Town and Country
There is a recall on the EVIC. Call your dealership and they will replace free of charge.
SOURCE: 2002 Chrysler Sebring Convert wont turnover
If you're not hearing a click from the starter check for a starter relay. May be burned out! DO you hear the fuel pump kick in when you turn the key on? If not something might have triggered your security system and locked you out!
267 views
Usually answered in minutes!
×