C 1130 code - 2006 Infiniti M35

No such code on a 2005 Sentra. Double check and repost. There's am 1132, 1137 and 1138, but no 1130

Google the codes and their general meanings ..read tips...have you released your manual break?

Sounds like an O2 sensor problem.

Thar could be any number of things (borrowed from the Foster Farms Chicken Commercial)

Check crank shaft sensor and cam sensor.

i think the code you are using is correct but the way you are using is wrong so i suggest you to visit the link give this link help a lot to me http://toolsnyou.com/

The vaccum hose connects to the rear of the plenum and runs toward the passenger side firewall. There's a splice about 12" inches from the plenum so you won't have to replace the entire hose.

Both codes indicated a failure in the outputs of your air fuel ratio sensors. Because of the fact that both sensors are reporting incorrectly, I would suggest checking your AF relay underhood for failure, or your ground wire on the back of the intake manifold for connection.

Often when these cars have spark plugs changed or valve cover gaskets changed, the ground wire on the back of the intake (which must be removed to perform the mentioned jobs) gets left dangling. With this ground wire not attached, both A/F sensors will report 0voltage, resulting in the two codes you received.

Ok you need to correct the mechanical issue and then deal with the codes, they are a result of the engine problem, not the cause of it.

I have been working on a 96 nissan truck for three years for an evap code and swirl control , I finally just made sure the swirl control solenoid operated properly then disconnected the vacuum hose from the swirl control actuator and plugged it . code fixed.been driving 3 months, no code