Troubles with the vacuum lines to conect back to the original pocition

SOURCE: vacuum line diagram

if you get a chilton from any local parts store it should have them in there

SOURCE: I have a 1992 Daihatsu

FYI, In the USA they're Rocky's, in the UK they're called Sportracks and in Australia they are Ferozas But they are all F300s (narrow track) or F310s (wide track). Other countries also use one of these three names (I think most of Europe use the Feroza title). There's also a slightly larger variant with a 2 ltr, 2.8 ltr and 2.8 ltr turbo which, in Australia is called a Rocky, In the UK it's a Fourtrack but I'm not sure about the USA. www.warfs.org (USA) and www.outerlimits4x4.com (AUS) are both excellent resources for further information. NB You need to register with outerlimits4x4 before you can see the Daihatsu link.

SOURCE: i need a vacuum line diagram

Use a industrial vacume tester, check each port coming off of the manifold, run your lines.

SOURCE: Need 95 gmc jimmy vacuum diagram. I have a loose

THat goes to your map sensor. If you look very closely under your hood there will be a vac line diagram there

SOURCE: 2001 montero sport looking for

Hi,

The P0403 code represents a problem with the Exhaust Gas Recirculation Solenoid or circuit.Below is the chart that explains and directs us to where the problem may exist.





Since there are a number of components or wires that can be at fault for this code,I feel it is not going to be something that we should attempt to diagnose via long distance. You may wish to check the basic wiring and vacuum supply to the solenoid, but if you find that the ECM is at fault, you will want to have this type of problem backed up by a good part and labor warranty.
Most solenoids need about 20 ohms or slightly higher resistance on the primary winding circuits to function correctly.

1. Using the VACUUM HOSE ROUTING as a guide, check to be sure that the vacuum hoses are correctly connected.
2. Check the connection condition of the vacuum hoses, (removed, loose, etc.) and check to be sure that there are no bends or damage.

Be sure to clear any trouble codes after you have made any repairs to the system.
Below is a technical service bulletin I have located on your vehicle, It may or may not be related to your current problem. I simply wanted you to have it.
TSB Revision: TSB-06-13-012
DATE: September, 2006
MODEL: See below

SUBJECT:
EGR SYSTEM TROUBLESHOOTING
- SERVICE MANUAL REVISION

PURPOSE
This bulletin contains additional troubleshooting procedures for the vacuum controlled EGR system on the affected vehicles.

Write the TSB revision number of this bulletin in the "TSB Revision" box at the bottom of the affected service manual pages.
AFFECTED VEHICLES
1995-1996 Mirage 1.5L and 1.8L (California emissions only)
1996 Mirage 1.5L and 1.8L (Federal emissions only)
1997-2002 Mirage 1.5L and 1.8L
2003-2006 Lancer 2.0L
2003-2006 Lancer Evolution
2003 Outlander
1996 Galant 2.4L
1997-1998 Galant 2.4L (Federal emissions only)
1999-2003 Galant 2.4L and 3.0L
1995-1999 Eclipse/Eclipse Spyder 420A and 2.0L Turbo
1996-1999 Eclipse/Eclipse Spyder 2.4L
2000-2005 Eclipse/Eclipse Spyder 2.4L and 3.0L
1996-1999 3000GT 3.0L
1996 Diamante 3.0L
1997-2004 Diamante 3.5L
1996 Montero 3.0L 12 valve
1996 Montero 3.0L 24 valve (Federal emissions only)
1996 Montero 3.5L
1997-2000 Montero 3.5L (Federal emissions only)
2001-2002 Montero 3.5L
1997-1999 Montero Sport 2.4L (Federal emissions only)
1997-1998 Montero Sport 3.0L (Federal emissions only)
1999-2003 Montero Sport 3.0L
1999-2004 Montero Sport 3.5L
1996 Truck 2.4L
1995 Expo/Expo LRV 1.8L and 2.4L (California emissions only)
1996 Expo/Expo LRV 1.8L and 2.4L (Federal emissions only)


Let me know,if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!