SOURCE: Chrysler PT Cruiser interior light fuse blown
hi ,
remove pos batt cable 1st
I would start examining the door switches since they are a constantly cycling part, Im not exactly sure how many accessories run off the door switches but I would examine the drivers door switch, study how the switch removes from the door, gently pull switch assembly out, being careful not to yank wires loose. remove it and look for arcing marks or soot, try all the doors, then I would disassemble the dome light itself if you cant find it, if you find the short you should reinsulate with thermoheat wrap heated with a hairdryer and maybe even some extra electric tape.
good luck
JM
SOURCE: Power door locks quit working, both interior
motor1258.
how did you check the relays, to find the problem with the door locks you need to remove the door panel and test for power at the door lock actuator or you can just buy the master switch and put it in and see if it works.
Under the hood on the fender well,Big black fuse box.Fuses are marked on the cover.
SOURCE: I HAVE A 2005 CHRYSLER SEBRING AND DOME LIGHT,RADIO ALL POWER LOCKS HAVE QUIT WORKING
me too! - looking at fuse #5 red 10 Amp one but has black thing on it.
Can't get if off..
Have read the manual is wrong and to use panel on side of fuse box for fuse locations...
SOURCE: my door open light stays on as do interior lights
MAKE SURE YOUR INTERIOR LIGHT SWITCH IS OFF.IF ALL IS GOOD.YOU COULD HAVE A FAULTY DOOR AJAR SWITCH.
49 views
Usually answered in minutes!
×