The firing order is 1 2 3 4 5 6. See below diagram. Hope this helps.
Hi,
its 1-6-5-4-3-2
SOURCE: change spark plug wires on 04 kia sedona
REMOVAL OF THE PLUGS:
Do not attempt any maintenance on spark plug if engine is hot.
1. Disconnect negative battery terminal.
2. Carefully remove high-tension leads.
3. Use compressed air to blow any dirt or debris from around spark plug hole.
4. Check that spark plug fits squarely in spark plug socket and remove spark plug.
Raise a vehicle and install SST(OK552 131 001) in order to replace cylinder 2, 4, 6 spark plug.
INSTALLATION:
1. Install spark plug into cylinder head.
Tightening torque : 18~22lb-ft (25~30N·m, 2.5~3.0kg-m)
2. Reconnect high-tension leads.
3. Reconnect negative battery cable.
Hope this helps and simple to understand. Good luck
SOURCE: what is the firing order on a 2004 kia sedona, and
I apologize for the late response...Due to the bad economic situation this site has had a substantial (+50%) increase in the number of questions being asked in the last four months.
If you have not already found the information: Click on the following web link: It has a clear Diagram and Schematic.
http://autorepair.about.com/library/firing_orders/bl-fo-0341.htm
Let me know if this helped, or if you have additional information or questions. Feel free to contact me at FixYa.com!
SOURCE: firing order diagram for an 03 kia sedona with
My apologies for the delayed response.
I am going back to answer - unanswered questions. I have only been on this site for the past 4-months. Questions Posted have exploded (+55%) since joining.
I do not know if you still need this information, but I am answering it either way.
CLICK on the following LINK. It has the Firing Order Diagrams you will need.
If you would: Before Clicking let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my sincerest apologies...
Thanks!
http://autorepair.about.com/library/firing_orders/bl-fo-0990.htm
SOURCE: I NEED A FIRING ORDER DIAGRAM FOR A 3.5 KIA SEDONA
Firing order 1.2.3.4.5.6
Looking at engine , number 1 cyl left front,number 2 left middle,3 left back
Number 4 right front,5 middle right ,6 back right
Fault codes indicate missfire cylinder 2 and 6
1,677 views
Usually answered in minutes!
×