Question about 2000 Isuzu Rodeo
After i cleaned the motor area and some of the motor i started motor check engine light came on and the motor started running super fast
A 2000 Isuzu would have fuel injection not a carb, so no choke is used.
You would need to get the computer checked for trouble codes, I would suspect a huge vac leak is the cause of the fast idle.
Posted on Jan 31, 2014
so all the lights that come on when you first turn the key on stay on? maybe your alternator is not working properly? or not connecting to your dash panel correctly? or maybe the engine management system has a fault in it? more likely to be a dodgy connection to your dash board.
Posted on Sep 06, 2008
After market spark plugs could be the problem.
Reinstall the old plugs and see if that fixes it.
This vehicle has an ion sensing ignition system and is real sensitive to the proper spark plugs. I would get the proper plugs from the dealer if the old ones work.
The codes P1311 and P1312 are ion sensing codes.
Posted on Oct 19, 2009
SOURCE: 2001 Isuzu Rodeo 54248 miles
If problem is only on startup and when idleing, then the problem is likely IAC system, also a vacuum leak will cause the same problem.
If problem is not only on startup and idle, but also when driving, then MAP sensor and EGR system must be checked.
Check also accelerator cable state and setting.
The first thing to do is pulling out the OBDII fault codes stored in the ECM. This is done connecting a code reader to the ECM diagnostic port. The job can be done for a small fee at any local garage, and it is done for free at AutoZone.
The codes will help locating the problem.
About possible faults:
Problem is stalling when idling and during startup, but engine idling fast all the time. Problem not starting at times it is due to the fact that the wrong mixture is being sprayed, this is probably causing flooding and misfire. Since the CEL is on, one of the codes returned is probably misfire.
Check IAC system. This is composed by a valve and a solenoid that check and control amount of extra air air when the engine is idling. The IAC valve is located on top of the throttle body.
Check the vacuum system and try cranking with gas tank cap off. Vacuum system is tested using an hand tool gauge onvacuum lines while spraying card cleaner on the hoses (or heating them with a torch). If there is a leak, pressure will go up. A big leak will also do hissing noise, and will often result in a lean code when doing an OBD code scanning.
This kind of symptoms can also be caused by weak wiring to MAP/MAF sensor (MAP in this engine).
If the car also drives very rough and is revving up and down in a weird way, check the EGR valve.
As first thing I would do a code scanning. This car is OBDII. The scan can be done for free at the nearest Autozone, or for a small fee at any garage.
If you get any OBDII code from the scan, report it here, so that we can individuate the possible reason for the problem.
If you repute my solution helpful, then please take some times to accept the solution. Providing good repair tips requires time and skills, and your feedback is important for us.
Posted on Oct 26, 2010
Tips for a great answer:
Jul 06, 2014 | Honda Fit Cars & Trucks
Aug 31, 2017 | 2003 Cadillac CTS
Feb 08, 2011 | 1989 Toyota Camry
Sep 05, 2010 | 2001 Chevrolet Cavalier
Apr 28, 2010 | 2004 Hummer H2
Mar 08, 2010 | 2003 Ford Focus
Jan 30, 2010 | 1999 Dodge Caravan
Nov 24, 2009 | 2000 Oldsmobile Bravada
Apr 30, 2017 | 1993 Oldsmobile Cutlass Supreme
99 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: