Need a tune up on a 1996 GMC snoma,5 speed,2.2 ltr.

Firing order 1-8-4-3-6-5-7-2 . 1-3-5-7 cylinders on drivers side, 2-4-6-8 on passenger side

5 WITH A NEW FILTER 4 1/2 WITH OLD ONE

The auto parts store will look it up for you

This is a blogger site,not a tech line or
data base of free info

You don't use VIN# for a belt
You use engine code or cu in or ltr

it time for a clutch job if the pedal feels ok, but if the pedal seems weird it may be you just need a slave cylinder.

Try this site, http://carservicemanuals.blogspot.com/
The manuals that I have downloaded so far have been fine.

1996 Nissan/Datsun Truck Pickup 2WD 2.4L SFI 4cyl
The Firing Order:

Firing order 1-3-4-2 --------- front | | of | 1 2 3 4 | distributor rotates counter vehicle | | clockwise ---------

Hope helped with this (remember rated this help) Good luck.

5 & 1/2 quart's to 6 quart's

You're kidding right? Transmission repair is not for amateurs. Heck, most mechanics don't even mess with them: it requires specialized (read: $$$) tools and expertise. Either take it to a transmission place, or buy a rebuilt one and swap it out. You'll be glad you did.

It seems the timing needs some tuning. Also all plugs need to be checked and changed if possible. It seems to be misfiring and a proper tune up job should solve the problem(including the plugs)...........sodeep