Question about 2004 Peugeot 307 SW

Open Question

Bonet catch not working - 2004 Peugeot 307 SW

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My daughter's Toyota rav4 2000 bonet cable broke and can't open it could you please help me thanks


its a hard one but it takes 2 people one to push down on the bonnet and another one underneath with a pair of mole grips, and crush the cable and pull it at same time, till it catches. you may need to take the body shield to gain access, or pull the cable that is left on the end of the cable if it snapped their, if it has snapped at the lock area its more harder to do without breaking something. but if you can gain access and another space you should be able to use a screwdriver to move the catch over. its push down and replace the push down when cable pulled.

Apr 21, 2018 | Toyota Cars & Trucks

1 Answer

Hood catch release cable become undone and cannot open the bonet. please help


by using a long lever and looking up from underneath see if you can push the latch to release the bonnet. To make the job easier you may need some one to push down on the bonnet at the same time to release the load on the latch

Jan 03, 2014 | Cars & Trucks

1 Answer

Renult megan bonet cable broken


generally, cable will not break.It might be cable endlock or lever or distrubed cable clamping.see from front under bonnet below the upper panel you will find bannet cable wire going to bannet lock, try n pull it. or pull the locking lever. it will definitely open

May 14, 2013 | Renault Cars & Trucks

1 Answer

2000 Ford Fiesta Zetec S. The leaver under the stearing wheel which opens the bonet has broken.


should be a cable attached to it push it back into the dash and try closing it

Dec 19, 2012 | Cars & Trucks

1 Answer

Open the hood of my 2000 oldsmobile bravada the latch under the hood is stuck


see if you can get someone to push down on the bonet above the latch as you pull the hood release like bounce the bonet slightly and try to pull it up at the same time if this works lube the **** out of ti before you close it again.

Jun 08, 2012 | 2000 Oldsmobile Bravada

2 Answers

My bonnet on my BMW e36 wont close fully so it is flush to the wings like it is suppose to, is there anyway i can adjust the bonnet to make it be fully closed and flush to the rest of the car many thanks...


My bonet on my 1 series wont close properly it doesnt appear to be catching in the release lock although the mechanisim is working when I press down on it manually. The bonnet is only staying shut because the opener catch/hook is working, but this is the only thing holding it closed.

Sep 12, 2009 | 1997 BMW 318

1 Answer

I need a used or new bonet in white colour for honda civic


new hood primed and painted will probably run you $300 or so... you can probably find a much cheaper one at a junk yard

Sep 09, 2009 | 2004 Ford Focus

5 Answers

I have a porsche boxter 986 year 2000 and can not open the bonet


you need to pull the C3 fuse and insert a wire and then put the fuse back in.
connect the neg ground to the metal steering column and the positive to the wire. close the car door and turn the door key on and off three times. open the door and now the hood latch will work.

Jan 18, 2009 | 2001 Porsche Boxster

1 Answer

Cobra car alarm


check if the switch in the bonet is damaged (sometimes working under the bonet you could damage the switch and miss it)installing a new battery should not affect the alarm

Sep 08, 2008 | 1997 BMW 318

Not finding what you are looking for?
2004 Peugeot 307 SW Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

scj103

Level 2 Expert

104 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...