SOURCE: Blower motor now only works in 5th speed, 1 to 4 not working
You are going to have to make a connector for your resistor to fit into the adapater under the dash. the new resistor doesnt reach the terminals on the connector. Even though it clips in place it doesnt reach. I took a piece of small soldier and put in the connector then plugged it in and it worked just fine. When you unplug the relay it will not work in any speed.
SOURCE: 96 Blazer A/C WILL NOT BLOW ANY AIR HOT OR COLD
BEFORE YOU DO ANY HARD WORK TURN ON YOUR A/C AND BLOWER AND TAP THE BACK OF THE BLOWER MOTOR WITH A SMALL HAMMER IN A COMPLETE CIRCLE. SOUNDS LIKE YOU JUST HAVE SOME STICKING BRUSHES IN THE BLOWER MOTOR.
[email protected]
SOURCE: Installing a blower motor in a 98 Chevy Blazer
96 chevy S10 p/u truck 4cyl 2.2 liter
shift solenoid electrical problem
SOURCE: How to replace a heat/ac blower motor in a 2001 blazer
it is under dash ,behind glove box,not a hard job at all
SOURCE: Where is the blower motor
Look right near the blower motor the resister is mounted right near it,it has multi wires going to it,from the blower motor,and the relay should be close by also,check the blower motor to see if it is the problem,it could be at fault.
135 views
Usually answered in minutes!
×