Question about 1986 Nissan Sentra 4 Door

Open Question

I need wiring diagram for computer for Nissan 1.8i 16valve

Pin layout for ecu

Posted by Anonymous on

Ad

5 Related Answers

Anonymous

  • 117 Answers

SOURCE: 2007 350z

here it is hope it helps


http://www.innovatemotorsports.com/resources/2003_2005_G35_350z.php

please leave feedback.
cheers

Posted on Jul 02, 2008

Ad
pal03246

Phil Lovisek

  • 726 Answers

SOURCE: Need an ecu wiring diagram

what is the car doing?? by you saing "need a ECM diagram?" what is the problem with the car. that car is pretty bulletproof and I have't seen any ECM issues unless your A/C drain is clogged up and water leaked onto/into your ECM frying it up. Let me know what your symptoms are.

Posted on Sep 01, 2008

Ad

Juan Guillen

  • 373 Answers

SOURCE: I need the number on the computer (ECU) nissan Stanza 87 SW, STD,FWD

Hi... On your question For ECM to 1987 Nissan Stanza..
Are 6 Available number .
2 are for vehicles 4WD. Incl. wagon. Calif emissions. 2261A-20R66RE,
with out calif, 2261A-20R06RE,

2 For vehicles FWD Wagons only. Calif emissions, 2261A-20R75RE,
With out Calif emissions, 2261A-20R15RE.

2 For vehicles Sedans FWD Exc Wagon. Calif emissions, 2261A-D5507RE,
With out calif emissions, 2261A-D4507RE,

NOTE , " RE" Mean Remanufactured ECM. Is not available new.

Ok.. Are the number I have Based on Mitchell ondemand, Repair Software.

I hope this info help on your question.
Any more questions let me know...


Posted on Nov 07, 2008

Anonymous

  • 6 Answers

SOURCE: I need a nissan Quest 97 wiring diagram for radio

go 2 autozone.com 4 free diagram online

Posted on Sep 21, 2009

Anonymous

  • 1 Answer

SOURCE: Lost Fuse Box Diagram - Altima 2005 2.5L

i need to know what ENG CONT AND ENG MTG means on the fuse box of my 2006 altima.

Posted on Jan 14, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have a Nissan 30l 16valve diesel wont start diagnostics give nats malfunction would like to know if the ecu is faulty


First check to see if you have a good battery and then begin checking current to your ECU. Might also want to check fuses / relays. Have you checked fuel pressure ?

Dec 23, 2016 | Nissan Cars & Trucks

1 Answer

Nissan exalta 2002 ecu pinout ecu no.mec11-251


Visit the on-line store, know as reliable-store, they have the repair manuals. I'm sure you will get the solution of your problem.
Best Manuals

Nov 19, 2016 | Nissan Cars & Trucks

1 Answer

I have a 87 Nissan 300 zx that every time I turn-on the key the fuse for the ecu blows. can any one help?


It could be a short in the wiring- a broken wire, or wire stripped of insulation, and touching metal somewhere. If you could look at a wiring diagram and find that circuit the fuse protects, you should be able to check the wiring without a lot of difficulty. The wire would enter the ecu on a certain pin number, and then you could check the resistance on the wire with a multimeter-with key off, and battery disconnected before unplugging the ecu. You will have to check the wiring all through the circuit, so you really do need a wiring diagram. If the wiring appears to be okay, then suspect a bad ecu. Used and reconditioned ecu's are all over e-bay. Pretty sure you could find one for your car. I just recently bought a used ecu from e-bay for my '87 Sentra, cost was $24.99, some place called auto computer wholesalers. And it works as good as a new one. Or as good as my old one, turns out that wasn't my problem, but I just kept it in the car.
Don't forget to disconnect the negative battery terminal. The ecu in those has constant power to the ecu, even with the key off. So never pull off the ecu connectors with the battery connected.
For a wiring diagram, buy a Haynes repair manual. Or register for free at autozone.com, giving make, model, year, and engine size if applicable. The repair guides do have some wiring diagrams, just not complete maybe. Or if interested, you can buy a subscription for $16.99 a month (or under $30 for a full year) from eautorepair.com. It is a DIY site by Mitchell, and with a very extensive amount of help and information. I had a one month subscription there, after getting very, very depressed with my Chilton manual. Couldn't even find a credible wiring diagram for my '87 from Chilton.

Aug 11, 2013 | 1987 Nissan 300ZX

1 Answer

Need ilustration of the wiring harnes on the distributor on a 1996 nissan altima theirs 4 wires that hookup on it but the connector is busted onto pieces


Go to Autozone.com and register your car for a free wiring diagram and fusebox layout. Another site, alldatadiy.com also has diagrams.

Aug 29, 2012 | 1996 Nissan Altima

3 Answers

Diagram ka20 cam timing nissan hardbody


need diagram for nissan ka20 camtiming

Jul 10, 2012 | Cars & Trucks

2 Answers

Electrical diagram


Hi,

Might this help?
They were originally posted here and here.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards. Thank you for using FixYa.

Aug 16, 2008 | 1992 Toyota Celica

1 Answer

2007 350z


here it is hope it helps


http://www.innovatemotorsports.com/resources/2003_2005_G35_350z.php

please leave feedback.
cheers

Jul 01, 2008 | 2007 Nissan 350Z

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14852 Answers

Vincent G
Vincent G

Level 3 Expert

2363 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...