Service ride and service stability what does that mean?

The red car warning light on the dashboard of your 2010 G-Class vehicle indicates a problem with the vehicle's stability control system. The stability control system is an important safety feature that helps to keep the vehicle stable and under control during driving, particularly in slippery or uneven road conditions. When the red car warning light is illuminated, it indicates that there is a fault with the stability control system and it may not be functioning properly. It is recommended to have the vehicle assessed by a qualified mechanic as soon as possible in order to diagnose and fix the problem. Continuing to drive the vehicle with a faulty stability control system can increase the risk of accidents or other issues.

If the circle is not continuous and has an arrowhead at the bottom, it has to do with the stability control system. See the link for a description and meaning. I recommend watching the short video near the bottom of the page.
http://dashboardsymbols.com/2010/10/dynamic-stability-control

take out the part you have fitted and have the OBD codes cleared ,then refit the part and see if the same happens

So the equinox is the same as a 2008 Suzuki XL7?????

The DSTC system by Volvo means Dynamic Stability & Traction Control, and is the equivalent of the ESP system (means the Electronic Stability Program). If the DSTC lights on the dashboard permanently the DSTC system is faulty. You must access the DSTC Electronic Control Unit (ECU) memory to pull out all DTC (Diagnostic Trouble Codes), using diagnostic equipment connected to the data link connector of the car. Then you will be full informed about bad pieces (e.g.: front right wheel abs sensor interrupted, ...). After bad pieces replacement you will be able to erase all faults memored by DSTC ECU, in other words reset the DSTC system and turn off the warning lamp on dashboard.

Thay means that your Stability Control System is malfunctioning. Your vehicle may be equipped with Continuously Variable Road Sensing Suspension (CVRSS) this system controls the ride height (Air Springs) and the stiffness (electronic shocks) of your suspension. Your computer data must be collected and used to help determine the cause of the failure before any repair can begin.

the symbol with a car and 2 curved lines behind means:
"Slip control" or "Stability control" (also known as ESC, ESP, ASR or DTC) warning.
Toyota Trac Inop Light Toyota's traction control helps you maintain traction on wet, icey, loose or uneven surfaces. There are complex wheel speed sensors that will trigger the traction control safety feature as needed. If you see the trac inop light illuminate, this feature might be disabled. A Toyota service rep can access the trouble code and identify what is needed to fix any potential issues. - See more at: http://jeffwylerclarksvilletoyota.com/section/secondary/toyota-dashboard-indicators#.dpuf

Toyota Dashboard Indicators

your truck is equipped with an air ride system the pump may be going bad or the sensor that controls the ride height may be on the fritz.

My Service Stability System Message along with the (ABS) Brake Light lit up on my dash, what can i do to fix it...Or what does this mean ?