- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Unfortunately the hub has to be driven or pressed out. This is usually a job that requires special tools not typically in the average person's tool box. Some people will try to pull it off with a slide hammer. That can work but you'll only be half-way there. You've still got to put it back once you replace the broken stud. One of the issues with removal of the hub is that you'll most likely have to replace the hub bearing because the inner race will be frozen to the hub shaft. Another job that'll require special tools. This is really a job for a shop. Sorry to be a downer. There are some youtube videos on-line that show this procedure. I'm confident that you can find one for your Honda. Good luck.
remove rear seat, remove round metal cover, disconnect fuel lines and wires from top of fuel pump, jack up rear of car. remove gas tank straps, lower gas tank with a jack, install is reverse.....if you need to just replace the fuel pump you don't have to remove tank you Can access from under rear seat good luck and please rate -jeff