Cars & Trucks Logo

Related Topics:

A
Anonymous Posted on Jan 20, 2014

86 chevy sub 6.2 diesel harmoic balancer pulley is loose

Do the pulleys come off the harmonic balancer?

5 Related Answers

Anonymous

  • 116 Answers
  • Posted on Dec 13, 2008

SOURCE: harmonic balancer

check the pulley if it wobbles alot replac it. or,
bolt may be comeing loose
put red locktight on the bolt adn torque it to 76 foot pounds
rank my solution &vote

Ad

Anonymous

  • 548 Answers
  • Posted on Sep 19, 2009

SOURCE: need to tighten a serpentine belt on a 2001 chevy

that is your tensioner pully and it very well may be going bad new one isnt very expensive and can be easily removed with a socket wrench and replaced please be sure to make a diagram of the serpentine belt before you remove so that you will rember how it goes back on

Testimonial: "Thank you! you're the man!"

Puppet03

Puppet03

  • 172 Answers
  • Posted on Oct 24, 2009

SOURCE: changing water pump on 04 chevy durmax diesel.

Heat the nut thats what we do in the shop and dont forget to use anti-seize when putting the bolts back in

Anonymous

  • 1403 Answers
  • Posted on Aug 13, 2010

SOURCE: chevy 6.6 turbo diesel 2005 harmonic balancer bolt

clockwise

raj somaiya

  • 5370 Answers
  • Posted on Jul 08, 2011

SOURCE: NEED THE BELT ROUTING DIAGRAM

1. a/c comp to water pump.
2. alt to p/s pump.
3. water pump, crankshaft, p/s pump.
4. water pump, crankshaft, idler. ------------- crank pulleys have 3 grooves, the third one is for AC.-------- Click this link to view the diagram for routing the belt:--- http://technoanswers.blogspot.com/2011/07/belt-routing-diagram-for-corvette.html ----------- This should help.Thanks.Helpmech.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

My crank pulley is loose on 2009 jeep Cherokee how do I tighten

There is one bolt in center of pulley/harmonic balancer. Sounds like the harmonic balancer has started going bad..if bolt in center of pulley is loose...which is fairly uncommon tighten which you just tighten Iike any other bolt. If it is tight then you will need the replacement. Replacement is a good bit more involved. Radiator has to be removed, special tool, harmonic balancer pulley remover is required..it will remove pulley. Then you line up pulley with keyway..tap on with rubber hammer until pulley is on far enough for bolt to be started..tighten the bolt and it pulls the pulley all the way into place.
0helpful
1answer

1995 GMC Suburban 6.5L diesel crankshaft harmonic balancer bolt tourque?

from 98 GM manual crank balancer bolt 270Nm or 200' lbs
crank pulley bolts 50Nm 0r 37' lbs

Copied from this site;
Harmonic balancer torque value Diesel Place Chevrolet and GMC Diesel Truck...

Hope this helps.
0helpful
1answer

How do you remove the harmonic balancer pulley

You need need a harmoic balancer puller you can get them at any auto parts store for 25 -30 dollars that makes it real easy some stores if your buying parts will give you one if you leave down payment and when you return it they refund your money
1helpful
1answer

I have a 1997 nissan Maxima. It is 6 cylinders. i am going on my third harmonic balance. The top pulley keeps seperating from the bottom pulley which are held together by a rubber core assembly. Trying...

Might be that one of your other pulleys is bent and over the course of a month it wobbles the belt and causes the harmonic balancer to split apart. Check all the other pulleys to see if they wobble or are bent.
4helpful
2answers

Were is the crankshaft position sensor located on 2001 chevy mali

It mounts in the side of the block near the crankshaft,it fits in a hole,going into the engine block.,look on the inside of the engine compartment ,on the firewall side,left of the pulleys,down low.
2helpful
2answers

HARMONIC BALANCER

I have a '94 Tempo, it had a "ticking" sound. It was the "harmonic balancer" (crankshaft pulley) a local mechanic changed it for $60, the part cost me $120 (I work for a Ford dealership) $180 without employee discount. you can get one for much less at a junkyard if you can find one. Good luck, Sean
0helpful
2answers
0helpful
1answer

Harmonic balancer

check the pulley if it wobbles alot replac it. or,
bolt may be comeing loose
put red locktight on the bolt adn torque it to 76 foot pounds
rank my solution &vote
Not finding what you are looking for?

68 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...