Question about 2009 Honda Civic
HOW TO RESET IT ENGINE CODE. I did the 90,000 mile belt,brakes,plugs,ect just need to turn it off
Posted by Anonymous on
If you have never changed a cambelt (timing belt) then it is not recommended that you attempt it. It is a job for a mechanic, as getting the cam timing wrong on reassembly is easy to do and can have disastrous consequences. It is easy enough once you know how, and if you are reasonably mechanically able, I'd suggest getting a repair manual for your vehicle that has a step by step procedure for timing belt replacement. Companies like Haynes produce very good repair manuals.
Posted on Oct 25, 2008
Okay, here goes-
1. Turn Key to on position.
2. Push and hold **valet button on the stock radio.
**Valet button is skinny bar located between am/fm & cd/tape buttons on stock radio.
Door locks will cycle one time.
3. Press any button on remote one time within 20 seconds. Door locks will cycle again.
4. To program up to 4 additional remotes repeat step 3 for each additonal remote.
5. Turn key off programming is complete.
Thanks for using Fixya, please rate if this helps :)
Posted on Mar 16, 2009
Hey I had the same code and I have a 2000 honda civic lx. My cousin
works at honda and drives a '96 honda civic and he has had that code
before on his car as well.
First thing he came up with was that the catalytic converter was cracked. We checked mines, and lo and behold, that's what it was.
Look under your hood, and there should be a catalytic converter with a sensor sticking out of it. It is connected to the exhaust manifold and the sensor sticks out of the heat shield. Around the sensor, look for a crack. If there's a crack, that's your problem.
Posted on May 03, 2009
Go to your local library and ask the Librarian to get you on-line to the Automotive Repair Reference Center, and then to the EBSCO database...you will find all of your wiring diagrams there.
Posted on Oct 07, 2009
Try removing the E.C.M fuse or disconnect the battery, if that don't work you'll have to reset it with scan tool, or have autozone pull codes and tell them to reset computer, they'll do this at no charge (free).
Posted on May 14, 2010
Testimonial: "Found this site to be not only very helpful, but the fast reply with an answer to my problem impressed me very much."
Tips for a great answer:
Usually answered in minutes!
Step 2: Please assign your manual to a product: