Cars & Trucks Logo
i
iftikhar Posted on Jan 18, 2014
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Engen problem and missing - 2008 Toyota Corolla

1 Answer

Lodhi Autos

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Toyota Master 992 Answers
  • Posted on Jan 20, 2014
Lodhi Autos
Toyota Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Feb 03, 2013
Answers
992
Questions
1
Helped
590352
Points
1808

Sir, your question is not very clear, but I will still try to post a solution here. Engine missing could be due to any problem in fuel system, ignition system, engine or ECM as well.

LOW ENGINE IDLE SPEED (Poor idling):
-Throttle body (do the cleaning and idle speed learning)
-A /C signal circuit
-Fuel pump control circuit
-Fuel pump
-Intake system
-P C V valve (clogged or open) and hose

ROUGH IDLING:
-Cylinder Compression
-Ignition system (Igniters, spark plugs, wiring harness)
-Spark plug fouled, gap too wide or too short. (1.00-1.1 mm)
-Fuel injector circuit
-E C M power source circuit
-Fuel pump control circuit
-Fuel pump (required pressure 44 psi - 49 psi)
-Throttle body (cleaning)
-Intake system
-P C V valve and hose
-Air fuel ratio sensor
-Heated oxygen s ens or
-Mass air flow meter
-Idle hunting
-Throttle body
-Intake system
-P C V valve and hose
-Air fuel ratio sensor
-Mass air flow meter

HESITATION/ POOR ACCELERATION:
-Fuel pump control circuit
-Fuel pump
-Spark plug
-Ignition system
-Fuel injector circuit
-E C M power source circuit
-Mass air flow meter
-Throttle body (do cleaning)
-Intake system
-Valve timing
-Cylinder Compression


Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Light Engen comes on

Pull up the error codes and post them here. Thanks.
0helpful
1answer

Mercedes c180 kompressor, 2003 model, 271 engen. I was when it flashed a red light on the dashboard saying oil level too high reduce. Then suddenly the engen stopped. I tried to crank it again and it...

Have you checked your oil level? Is it over full on the dipstick? What does the oil look like - clear or milky? If milky, you may have had a head gasket failure or crack in the block/head that allowed coolant into the crankcase. If you kept running the engine after this, it may very well have seized. The timing chain can't get 'too tight', so that is not your problem.
Use a breaker bar with the appropriate sized socket and see if you can manually rotate the crankshaft pulley. If not, your engine is going to need some serious work (or replacement).
0helpful
1answer

2000 taurus runs good untill gets in a pull and starts missing and check engens light flashing

check fuel pressure
check it for tune up and check ignition wires (coil)
if all checks ok
suspect cat convertor (exhaust back pressure test )
you can post your codes for more help
0helpful
1answer

Dodge 300van---318 engene 1970

Fuel filter has nothing to do with a misfire

That is a vacuum leak,ignition problem,
timing or mechanical timing issue
0helpful
1answer

Check engene light came on

The Check Engine light comes on to tell you that there is a problem with the way the engine is running. It could be a worn, broke or dirty sensor, or a miss-fire of 1 or more cylinders. The easiest thing to do is take the truck to a big box part store and have them retrieve the info from the trucks computer. This will tell you what area we need to look at. Post the codes and we can go from there.
0helpful
1answer

Check engen light is comeing on and it sayes miss fire cylenders 1,2,3,4 system to lean o2 responce slow

02 sensors keep the balance of rich/lean fuel--u may hav failin sensors but the computer cant tell if theirs a vacuum leak-a test has to be done-these leaks cause lean conditions which can damage intake valves
0helpful
1answer

I have suzuki 2000 grand vitcha with no engen codes it has no power and a miss 2.4 v6 how do find out what is going on

If your vehicle is missing out, then the computer should pop a code. If it doesn't I would suspect the computer is bad. This can be checked out at a garage. one way you can check it to pull a plug off any sensor and see if the light comes on. you will have to leave it off from a few minutes while the vehicle is running. Just because the light doesn't come on, doesn't mean your computer is bad, the light could be bad. Agian this has to be checked at a garage. Good luck.
0helpful
1answer
0helpful
1answer

Check engen turnd on. car lacks power back to normol after 20mph

Probably a spark plug! Check em all out and if old replace with new ones gapped properly!
0helpful
1answer

97 kia sephia engene shakes and sometimes lunges forward/why

CHECK FOR A MISS FIRE - COIL PACKS, BOOTS, SPARKPLUGS. ALSO CHECK FOR VACUM LEAKS.
Not finding what you are looking for?

500 views

Ask a Question

Usually answered in minutes!

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...