Question about Kia Spectra
Dave, The P0700 code is a generic fault code indicating the the TCM (transmission control module) has recognized a problem and the P0755 is the indicated problem. I'd recommend you check your transmission external electrical connector for water intrusion and corrosion at the terminals by disconnecting the connector. If nothing appears wrong, I'd then recommend you drop the lower transmission pan and take a look at the residue deposit that is laying on the bottom of the pan. You should only see a relativily minor amount of grayish, black clutch material residing there. Pay particular attention for a gross amount of this or any large particular material, including any metal, either filings or chunks, or any brass or aluminum. If this checks out to be fairly clean, then I'd recommend you replace that "B" solenoid (2-3 shift solenoid) and have the trans. pan and filter replaced.; I'd also highly recommend you have the trans flushed for anyother particular matter that may reside internally inside the transmission. You'll have to have the codes cleared and the transmission relearned for shift feel, at that point.
Posted on Jan 08, 2009
Tips for a great answer:
Nov 07, 2015 | Cars & Trucks
Aug 26, 2014 | Kia Spectra Cars & Trucks
Nov 04, 2013 | 2006 Dodge Stratus
Apr 22, 2013 | 1996 Toyota RAV4
Apr 03, 2011 | 2002 Jeep Liberty
Apr 13, 2009 | 1997 Chevrolet Tahoe
Dec 16, 2008 | 1995 Dodge Stratus
Oct 30, 2019 | Kia Cars & Trucks
261 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: