Question about Isuzu Trooper
tensioner usually has a bolt in the center of the pulley wheel that is 17 to 19mm. use a breaker bar and socket to hold pulley back (sometimes has a lock that you can engage) then you can move the belt into and out of the pulleys.
have the new belt ready after you pull the old one, put it around all BUT the tensioner pulley and it will be MUCH easier to put on if you are by yourself>
Posted on Feb 24, 2009
what model ?? 8 valve?? 16 valve?? petrol ?? diesel?? .Remove np one spàrk plug and put a long thin screwdriver into hole and turn engine till the piston is at the top and then look for timing marks ,if you still cant see them paint the cam gear .with a couple of spots of white paint ,the lower crank mark it when the keyway points at the top of bottom of the engine.If i remember rightly these opel engines have the timing mark as a white line on the belt .But mark it anyway and always rotate the engine 360% by hand to make sure the valves clear and you have it right
Posted on Mar 20, 2009
SOURCE: 2000 vw jetta
Use this link . It will tell you where the marks are for your jetta.
Posted on Apr 05, 2009
timming marks on cams face each other 3 and 9 o clock crank mark at about 6 o clock mark in cover and sump auto adjuster arrow should be in v mark to set this requires turning water pump by loosening water pump bolts slightly be warned some times this causes pump o ring seal to leak if turning.
Posted on Jun 21, 2009
Tips for a great answer:
Oct 04, 2011 | 2000 Volvo S80
Apr 19, 2011 | 2001 Isuzu Trooper
Mar 12, 2011 | 1994 Isuzu Trooper
Jan 31, 2011 | 2001 Isuzu Trooper
May 01, 2010 | 2000 Mazda Protege
Mar 10, 2010 | 2000 Ford Focus
Nov 06, 2009 | 1997 Isuzu Trooper
Jun 28, 2009 | 2000 Kia Sephia
May 19, 2009 | 2000 Daewoo Lanos
Apr 05, 2009 | 2000 Volkswagen Jetta TDI
203 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: