Question about 1998 Mercury Sable

1 Answer

Transmission linkage need diagram

Posted by john packer on

Ad

1 Answer

Dean M

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 16 Answers

Https://www.google.com/search?q=1998+Mercury+Sable+Transmission+linkage+diagram&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-US:official&client=firefox-a

Posted on Jan 16, 2014

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1986 f150 4 wheel drive w/automatic transmission won't shift out of park even with all linkage disconnected


Your transmission is broken inside. There are shifting forks and linkage inside that jammed up - due to the delicate nature of the linkage, it is likely it bent. Remove the side plate the linkage bar hooks to and carefully remove plate to inspect for disconnected or bent linkage. If the plate won't come off, then the transmission will need to be disassembled to fix.

Feb 15, 2015 | Ford F-150 Cars & Trucks

1 Answer

Eaton road ranger gear box linkages sloppy need linkage diagram


this needs professional transmission inside looked at this is not simple cable if gear box sloppy its in the trans

Nov 09, 2013 | 2002 Mitsubishi Mirage

1 Answer

Transmission diagram for 93 dodge grand caravan 3.3


This would have to be obtained from a Transmission shop or directly from Chrysler Corp.

Apr 27, 2012 | 1993 Dodge Caravan

1 Answer

2002 windstar transmission schematic


I am assuming you need a schematic for this and that you've check all of the other more common things like broken linkages, low transmission fluid, etc. Other than the wiring diagrams that are found in the Haynes or Chiltons manuals, you would have to get a service manual from a dealer.There just isn't much electrical inside a transmission though that isn't covered in the wiring diagrams found in these manuals,which can be found at your local parts store.

Nov 21, 2011 | 2002 Ford Windstar Cargo

1 Answer

I am having a problem getting my 1993 Buick Riviera into park. Is this a problem I can fix with lubricant or linkage adjustment or do I need to take it to an auto repairman. Is their a linkage diagram...


Linkage may be worn out if you can't reliably get it into park. I would take it to a certified transmission shop or tech and see what can be done about it.

We had a similar problem on a 1980 Chevrolet Suburban that had a worn out linkage inside of the transmission, and it would not go into park very reliably. It had about 100k mi. on it at the time.

Feb 15, 2011 | 1993 Buick Riviera

2 Answers

What seal can leak on a 1999 Cougar manual transmission? Where can I see a diagram from engine to rear axle?


Hi:
Your manual transmission is most likely leaking from one of the drive axle seals.
If you want detailed diagrams of your car, then a good choice would be purchasing a subscription from :

www.alldatadiy.com

For about $20 you will have access to diagrams, troubleshooting, and more!

Nov 23, 2009 | 1999 Mercury Cougar

1 Answer

TRASMISSION IS GOOD BUT WONT SHIFT INTO REVERSE DUE TO LINKAGE NOT BEING RIGHT


Go to http://www.hmaservice.com/ and register the vehicle (By VIN). Afterward you'lll have access to manuals, wiring diagrams, service bulletins, etc.
Good Luck.

Jun 02, 2009 | 2000 Hyundai Sonata

2 Answers

1997 JEEP CHEREOKEE WONT GO INTO OVERDRIVE BUT THE OVERDRIVE LIGHT COMES ON LOOKING FOR A DIAGRAM FOR IT 4.0 LT MOTOR


Try to adjust the linkage cable on the transmission; if that don't work change the transmission fluid and filter.

Mar 02, 2009 | 1997 Jeep Grand Cherokee

2 Answers

Need a diagram for the transmission linkage 1977 Delta 88


If your pan is dented or crushed your selector paw in the trans has nowhere to go, this is super easy to fix - dont try to fix the pan, you can get a new one for cheap - or a used one if the salvage yard has not crushed everything with that trans, go to the parts store and get a new one maybe $20-30, it is very straight forward - make sure you get a new gasket ((or)) what I do is use permatex rtv black and put a nice even bead around the pan - smooth it out with your finger to about 1/16" thick and let it set up for about 1/2 an hour or till a little tacky put all your bolts in finger tight and retorque aroun the pan every other bolt until they are all tight (check torque specs and definatly use a torque wrench) and might as well change the filter since you are there (very easy) use hurst hot shift fluid or B&M trick shift for replacement fluid

Jan 29, 2009 | 1985 Oldsmobile Delta 88

Not finding what you are looking for?
1998 Mercury Sable Logo

Related Topics:

109 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14852 Answers

Mike

Level 3 Expert

4372 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...