Question about 1994 Toyota Previa

Open Question

How to remove front bumper on 2003 previa - 1994 Toyota Previa

Posted by Anonymous on

Ad

1 Related Answer

emissionwiz

Marvin

  • 85239 Answers

SOURCE: how to remove Toyota camry 2003 front bumper bar

The video at this YouTube LINK outlines the bumper removal to change the headlights in this case.

Posted on Sep 07, 2012

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Detailed instructions on front bumper removal. NOTE: From all the videos, it appears the CAB is different than the sedan. An example is the grill does NOT come up with the hood.


Remove wheels. Remove fender liners front. Remove three nuts per side from inside fender wells. Remove fog lamp grilles. Remove vertical bolt just inside grilles--pointing up. Remove two screws per side under hood near front of fender. Put milk crate under front bumper. Remove belly pan first. Slide bumper forward onto milk crate, disconnect headlight washer line at quick disconnect if so equipped. Disconnect fog light connectors. Remove bumper.

Oct 16, 2015 | 2003 Audi A4 Cabriolet

1 Answer

Remove front bumper fascia on a 2003 tracker


Best way is ask a garage that does Chevy or get an illustrated parts list, maybe online or ebay and this will at least show the location of all the bolts and clips for the front end. One thing is, have you a comprehensive tool kit to tackle this task and maybe a degree of knowledge to identify the components?

Nov 15, 2014 | 2003 Chevrolet Tracker

1 Answer

How to remove Toyota camry 2003 front bumper bar


The video at this YouTube LINK outlines the bumper removal to change the headlights in this case.

Sep 07, 2012 | 2003 Toyota Camry

1 Answer

Remove front bumper 1999 tarago


Hi
This is how you remove the front bumpers from 1990-2000 model Toyota taragos/Previas
First if your tarago/previa has a bull bar it has to be removed, before you can remove the front bumper.

There are 6 X 18 mm bolts secured to the bull bar brackets, remove the 3 x 18mm on the left and 3 x 18mm on the left and place the bull bar in a secure area to reattach later, don't be surprised if its full of rust it needs to be sand blasted, rust treated and repainted.
The next step is to remove the bull bar brackets to do this you must remove the grille to access the 4 x 18mm bolts on the inside of the grille 2 x 18mm on the left and 2 x 18mm on the right.

Open the bonnet of your tarago/previa there is a screw at the top of the center of the grille that has to be removed and placed in a container to reassemble later.

The next step is a bit tricky but with persistence and practice you will get better, the grille has four plastic clips that hold the grill in place.


Now listen carefully, you cant just pull on the grille firmly and hope that strength alone will pop the grille, these clips are designed to open when the grille is pushed into place so the top and bottom of the clip have to be depressed to slide the insert out to remove the grille, but you can depress one side a time it dosent have to be both at the same time.


It just takes take and patience to do, start from the top left clip, pull the grille towards you and with a flat blade screw driver look down the grill and press the top of the clip still pulling the grille, the clip will depress but now you have to do the bottom of that clip too.


There are gaps in the grille you need a tool like a L shape pick or an interior tool shaped like a L for removing door trims, you can buy these items at $2 dollar shops, you feed the tool through the gap in the grille and place it under the bottom of the clip and when you press down it lifts up depressing the bottom of the clip while you are still pulling the grille towards you.


Once that clip is out stay on the left side and do the left bottom clip repeat the process and then do the right top clip and then the bottom right clip, when the grill is out push all the clips back into the grille so you don't loose them and place grille in a secure place until your ready to reassemble.


When you reassemble the grille you just place the grille over the insert holes and push them back into place they will automatically snap back into position and then screw the center top grill screw back in.


Now the grille is out, you will need an extension on your ratchet to reach and remove these bolts 4 X 18mm bolts, 2 on the left and 2 on the right, there is a dryer bottle on the left or right of your vehicle depending on country, so the extension needs to be reasonable long.


Once the brackets are removed place the bolts into your container, there are 4 x10mm bottom bumper bolts securing the bumper onto the reinforcement bar remove them.


Then there are 2 X 10mm upper corner bumper bolts securing the bumper to the body remove them, and then the last 2 X 10mm to be removed are at the bottom of the corner bumper secured on to a rail.


Once these 10mm bolts are removed the front bumper will slide off, place the bolts in your container and reassemble when ready.


Cheers



11_25_2012_11_59_18_pm.jpg

Jun 07, 2012 | Toyota Cars & Trucks

1 Answer

Need to replace the headlight assembly on front passenger side do i have to take off the bumper? for ponitac vibe 2003 also have dent on the area


Yes you do. This is the steps to do that to replace the entire headlight assembly:


Remove the front fascia.
  • Remove the front fascia extensions, if equipped.
  • Remove the front fender liners.
  • Remove the fog lamps.
  • Remove the bolts (4) from the front bumper fascia (3) at the fender.


506bafd.gif

Remove the bolts from the front bumper fascia at the fender



  • Remove the push-in retainers (2) from the bumper fascia using J38778.
  • Remove the fascia bolts (1) from the fascia.
  • Remove the fascia from the vehicle.
  • Remove the 3 bolts which secure the composite headlamp.


  • 7f1ec16.gif

    Remove the 3 bolts which secure the composite headlamp



    1. Remove the sidemarker bulb electrical connector.
    2. Remove the sidemarker bulb, if necessary.
    3. Remove the composite headlamp assembly from vehicle.

    To install:

    1. Install the sidemarker bulb to the composite headlamp, if removed.
    2. Connect the sidemarker bulb electrical connector.
    3. Secure the composite headlamp to the vehicle with the 3 bolts. Tighten the headlamp mounting bolts to 89 inch lbs. (10 Nm).
    4. Install the front fascia.
    5. Install the headlamp bulb to the composite headlamp, if removed.
    6. Fasten the headlamp bulb retainer clip.
    7. Install the socket to the headlamp bulb.
    8. Install the rubber cover to the composite headlamp.
    9. Aim the headlamps.
    10. Close the hood.

    Oct 12, 2010 | 2003 Pontiac Vibe

    1 Answer

    I would like to remove the front bumper of my 2003 Civic Hybrid. I want to replace the horn which is under the bumper.


    pop hood .... remove clips directly on top of the bumper.... remove screws in fender.... and bolts under the bumper.... thats what i did on my civic yours should be similar.....

    Jun 17, 2009 | Honda Civic Cars & Trucks

    1 Answer

    Horn not working on a 2003 mini cooper...


    If you have removed the front bumper then there were holes in the metal bumper the size of baseballs on either side. Just to the outside of these holes and behind on the core support is where the horns are suppose to be. Your outside temp gauge should be the longest wire on the drivers side that comes through the metal and attaches to the inside of the plastic bumper.

    Apr 23, 2009 | 2003 Mini Cooper

    1 Answer

    Front bumper


    if your a hands on guy not to difficult..... support the bumper.... unplug fog lights...unscrew several bumper screws and brackets... pull off.... same for installation... but lining it up could take time

    Apr 20, 2009 | 2003 Hyundai Tiburon

    Not finding what you are looking for?
    1994 Toyota Previa Logo

    Related Topics:

    192 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Toyota Experts

    Marvin
    Marvin

    Level 3 Expert

    85239 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22485 Answers

    Jeffrey Turcotte
    Jeffrey Turcotte

    Level 3 Expert

    8984 Answers

    Are you a Toyota Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...