- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Question edited for clarity. P codes for DTCs must have upper case P.
All questions need FULL 'year make model'.
White smoke is steam, and this is normal at this time of year and is mentioned on this website a LOT at this time of year. Gasoline has weather in it at molecular level and is burned off as steam.
P0300 unknown random misfire
P0303 Misfire on Cylinder 3
P0304 As above on 4
P0449 - Evaporative Emission Control System Vent Valve/Solenoid Circuit Malfunction
P0455 - Evaporative Emission Control System Leak Detected (no purge flow or large leak)
Both are refer at EVAP system; other EVAP DTCs: P0440 - P0441 - P0442 - P0443 - P0446 - P0453 - P0455 - P0456
This indicates a fuel vapor leak or lack of purge flow in the EVAP control system. It means a large leak has been detected. The (EVAP) emission control system prevents the escape of fuel vapors from a vehicle's fuel system. Fuel vapors are routed by hoses to a charcoal canister for storage. Later, when the engine is running a purge control valve opens allowing intake vacuum to siphon the fuel vapors into the engine.
Symptoms: You likely won't notice any drivability problems. Causes: most likely means one or more of the following has happened: A loose or improperly affixed gas cap A non-conforming gas cap (i.e. not factory/original brand) Other leak or damaged piece in EVAP system
Possible Solutions: the most common repair is to: Remove and reinstall the gas cap, clear the codes, and drive for a day and see if the codes come back. Otherwise, replace the gas cap, and/or Inspect the EVAP system for cuts/holes in tubes/hoses (you may hear a vacuum noise or smell fuel), repair if necessary
P0455 OBD-II - Evaporative Emission Control System Leak Detected (no purge flow or large leak)
This indicates a fuel vapor leak or lack of purge flow in the EVAP control system. It means a large leak has been detected. The (EVAP) emission control system prevents the escape of fuel vapors from a vehicle's fuel system. Fuel vapors are routed by hoses to a charcoal canister for storage. Later, when the engine is running a purge control valve opens allowing intake vacuum to siphon the fuel vapors into the engine.
Symptoms: You likely won't notice any drivability problems.
Causes: A code p0455 most likely means one or more of the following has happened: A loose or improperly affixed gas cap A non-conforming gas cap (i.e. not factory/original brand) Other leak or damaged piece in EVAP system
Possible Solutions: With a p0455, the most common repair is to: Remove and reinstall the gas cap, clear the codes, and drive for a day and see if the codes come back. Otherwise, replace the gas cap, and/or Inspect the EVAP system for cuts/holes in tubes/hoses (you may hear a vacuum noise or smell fuel), repair if necessary
Hope this helps (remember to rate and comment this answer).
P0446 Evaporative Emission System Vent Control Circuit.
The following are descriptions of all Evaporative possible codes:
P0441 Evaporative Emission System Incorrect Purge Flow P0442 Evaporative Emission System Leak Detected (small leak) P0443 Evaporative Emission System Purge Control Valve Circuit P0444 Evaporative Emission System Purge Control Valve Circuit Open P0445 Evaporative Emission System Purge Control Valve Circuit Shorted P0446 Evaporative Emission System Vent Control Circuit P0447 Evaporative Emission System Vent Control Circuit Open P0448 Evaporative Emission System Vent Control Circuit Shorted P0449 Evaporative Emission System Vent Valve/Solenoid Circuit P0450 Evaporative Emission System Pressure Sensor/Switch P0451 Evaporative Emission System Pressure Sensor/Switch Range/Performance P0452 Evaporative Emission System Pressure Sensor/Switch Low P0453 Evaporative Emission System Pressure Sensor/Switch High P0454 Evaporative Emission System Pressure Sensor/Switch Intermittent P0455 Evaporative Emission System Leak Detected (large leak) P0456 Evaporative Emission System Leak Detected (very small leak) P0457 Evaporative Emission System Leak Detected (fuel cap loose/off) P0458 Evaporative Emission System Purge Control Valve Circuit Low P0459 Evaporative Emission System Purge Control Valve Circuit High
---
At least the cap isn't loose for the gas tank.
I would clear the code with an OBD-II Scanner 'erase code' button, and see how long it takes for it to come back.
P0441 Evaporative Emission Control System Incorrect Purge Flow
P0446 Evaporative Emission Control System Vent Control Circuit Malfunction
P0455 Evaporative Emission Control System Leak Detected (Gross Leak) http://www.toyotanation.com/forum/showthread.php?t=128923
×