Question about Audi A4
ECU or CVT Transmission problem. Would I still pass the smog check?
Yes because the vehicle has Catalytic converter on it which is what catches the gases not the ecu
Posted on Jan 13, 2014
The only way to check the trans fluid is to drain the fluid right out of the trans pan. There should be 5 liters. The only way to get the fluid in is by pumping the fluid back in by means of the fill plug on the lower front of the transmission. I believe it is a 4 or a 6mm allen to remove the plug. Whatever you use to pump the fluid back in needs to seal where the fill plug is because fluid will pour right back out. I would change the fluid at least every 50k.
Posted on Mar 17, 2009
is it a 1.8 turbo or 2.8 V6 or 2.7 biturbo V6 ? on most models what you will be looking for is a 3 letter code like ATQ or APW and is normally on a sticker on the timing belt cover, it is also stamped into the engine on a ledge up high. if no luck there check the owners manual, around the 3rd page there will be a sticker that was put in the book during predelivery inspection this sticker is about 3 inches by 3 inches and filled with id codes for almost everything. If the pdi wasn't done right another copy of the same sticker will be under or next to the spare tire in the spare tire well.
Posted on Mar 24, 2009
LISTEN CLOSE. THERE IS A PLUG ON PAN. REMOVE IT. WITH A SYRINGE TYPE CANISTER YOU NEED TO INJECT THE FLUID INTO IT UNTIL IT STARTS TO COME OUT. THEN CAREFULLY START VEHICLE AND INJECT ANOTHER 3/4 QUART UNLESS IT STARTS TO COME OUT OR EVEN A QUART.LET IT RUN FOR 5 MINUTES THEN CONTINUE TO INSERT UNTIL IT OVERFLOWS AND TIGHTEN THE PLUG BACK TO THE PAN. i WOULD ONLY USE AUDI VOLKSWAGON FLUID AND YES IT CAN RUN $14 TO $18 A LITER
Posted on Apr 06, 2009
Tips for a great answer:
Aug 19, 2016 | Audi Cars & Trucks
Sep 22, 2011 | 2002 Audi A4
Sep 28, 2010 | 2006 Audi A4
Sep 23, 2009 | 2004 Audi A4
Jul 01, 2009 | 2004 Audi A4
Jan 27, 2009 | 2002 Audi A6
108 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: