SOURCE: removing rear light assembly on honda odyssey 2006
Yes, there is a "spear point" plastic clip that is still engaged into a socket type holder in the front outboard portion of the tail lamp assembly. Pry gently with a tape wrapped screwdriver at the front outboard corner of the assembly and the clip will release. You will then be able to see how the clip works and will be able to align and engage it first when replacing the tail lamp assembly.
-T
SOURCE: Transmission fluid/filter change in 2000 Honda Odyssey
I would not recommend using Dexron III. Honda Odysseys are prone to transmission problems. A drain and fill with Genuine Honda Fluid is Recommended. The drain plug can be removed with a 3/8 ratchet at the bottom of the trans. The fill hole is at the top of the trans. You remove it with a socket on a long extension. The capacity is close to 3 quarts
SOURCE: How to change the cabin filter on 2006 Honda Odyssey?
I will never understand why this service is so expensive at the dealership.
I made a video showing how this is done: (I would recommend watching the video in HQ and full screen)
SOURCE: 2000 Honda Odyssey - P1739
P1739 Automatic Transaxle Concernsthis is from the Honda manual, what does this mean? it means there is an electronic shift solenoid fault in the transmission and it need to have the Honda dealer hook up there dealer only test equip to pin down the exact issue with the trans controls.
SOURCE: 2005 Honda Odyssey brake light housing removal
Yes, there is a spear point style clip that is holding the assembly. Wrap a flat blade screwdriver with some masking tape (prevents paint scratches) and pry between the forward outboard corner of the brake light housing and the car body. You want to pry the assembly rearward.
661 views
Usually answered in minutes!
×