SOURCE: running rough
the engine check light is telling u a sensor has failed u need to go to mechanic to check codes in the computer to find out which one it is
rate answer please
SOURCE: 2005 ford escape. The ABS light is on and 4x4 flashing
You need to remove your tyres and clean the abs sensors well enough.
You might also change your brrake pads if they have gone bad.
Rate this please
SOURCE: Check engine light is flashing and car runs rough.
Its either running too rich or too lean, either way have it seen to quickly or engine damage MAY result.
SOURCE: P0750 and P0755 codes on a 2005 Ford Escape, 6
All I will tell you is, that any time you have transmission
issues,you have to stop using the vehicle immediately
It doesn't matter what the situation is with transportation
or appointments,your vehicle has priority over everything
If not, your going to end up pulling it out & your repair bill
will start at $1,500 & go up
Both those codes, as I suspect you know, appear to be
shift solenoids & you don't exactly have a premier trans
to start with,mazda I believe
I would suggest a trans repair shop
Check engine light flashing always signals Misfire,You are equipt with a COP (coil on plug),when these fail you will experience what your are experiencing,
270 views
Usually answered in minutes!
×