Yaris timing Hi can u help me with a diagram of a yaris 1kr timing mark pls

the EFI works just like that, if ECU sees no spark it cuts fuel fully./
to end crash and burn as seen on TV and by laws here USA
My 2009 1kr Toyota Yaris we check all fuses first (a test)
then we scan the PCM using a scan tool. eg: omg CKP sensor or CMP sensor is dead ,. if seen.
have a shop fix this or buy the tools and learn how.

1.5L I4 , engine.
how man miles
buy it used and dead??>???????????????????????
chain drive cams, so I guess they didn;t scream for help just before it died right (chain thrashing/)
this engine has 4 COP coils, are all 4 dead? the classic test?
or just 1, all 4 must spark , not JUST 1, see my drift?
if all are dead and fuses all good
the scan tool tells you why,
P03xx errors. 1 for cmp or 1 for ckp deathh
ckp crank sensor wires fell off or got heat by road hazards.
CMP is on cam end. not lose.

Try one of the pay for information sites because it is not published for free that I can find.

Toyota Yaris Main and Big end Torques:
Tighten the main and big end bolts in sequential order and in steps two steps.
- Main bearings. Stage 1. 30 Nm.
Stage 2. 59 Nm.
- Big end bearings. Stage 1. 15 Nm.
Rotate further by 90 degrees.

its use timing chain. and the mark is on the chain just follow the chain

Timing marks Toyota Yaris.
Match the marks as shown in the diagram.

Timing marks Toyota Yaris 2007.
Match the timing marks as shown in the following diagram.

Thank you for visiting Fixya.

cam? what year?
alldata.com
login and read , like we do....

Main caps:
225 kg cm and rotate ninety degrees more.
Connecting rod bolts:
155 Kg cm and rotate further ninety degrees.

check that the cam sensor rotor is on the camshaft properly and is adjusted to the correct air gap
if the dealer just did the overhaul then take it back to them