Neutral safety switch - 2007 Pontiac Solstice Convertible

hi Bobby.
this is all i could find.
see if this helps you out.
where is the neutral safety switch on 2006 chevy impala Google Search
or read this.
Where is the neutral safety switch? Column shifters have the neutral safety switch located on the of the transmission. Mechanical floor shifters have the neutral safety switch located on the of the transmission. Electronic floor shifters have the neutral safety switch in the shifter housing and a gear position switch on the transmission.11 Aug 2016

How to Replace a Neutral Safety Switch ' YourMechanic Advice

https://www.yourmechanic.com/.../how-to-replace-a-neutral-safety-switch-by-marvin-su... Search for: Where is the neutral safety switch?
or you could go to this link and it should help you out some more.
where is the neutral safety switch on 2006 chevy impala Google Search

You have a great question that I cannot answer completely as I do not know what you drive. These links should help:

https://www.2carpros.com/articles/how-a-neutral-safety-switch-works

How to fix your NSS Neutral Safety Switch

How To Test and Replace the Neutral Safety Swtich Inhibitor Switch P0705

Neutral Safety Switch

Claude, safety neutral switch by pass, there is a couple ways.

How to Bypass neutral safety switch

bypass neutral safety switch LS1TECH


https://www.google.ca/url?sa=t&rct=j&q=&esrc=s&source=web&cd=4&cad=rja&uact=8&ved=0ahUKEwi5gpXsg_bKAhWEsh4KHRTKANwQFggoMAM&url=http%3A%2F%2Fmyautomatictransmission.com%2Fhow-to-replace-a-neutral-safety-switch.htm&usg=AFQjCNHrnDhg3LWzAtmD-ZF2Geou4MaXrg

https://www.2carpros.com/articles/how-a-neutral-safety-switch-works

Here's a video on replacing your neutral safety switch. 2006 honda odyssey neutral safety switch replace Here's a link to a new part. http://www.autozone.com/batteries-starting-and-charging/neutral-safety-switch/duralast-neutral-safety-switch/honda/odyssey/2001/6-cylinders-3-5l-mfi-sohc-vtec/229281_0_0_3381

Here's a pic of your neutral safety switch. http://www.autozone.com/batteries-starting-and-charging/neutral-safety-switch/duralast-neutral-safety-switch/oldsmobile/achieva/1997/4-cylinders-t-2-4l-sfi-dohc/124162_0_0_1277_15968

Daewoo cars have track record for dependability in addition to solid construction. The most important part of a car's design is the safety features. Circumvent excessive risk while motoring by insuring that your car has the safety gear that you want. A vehicle's Neutral Safety Switch is located on your clutch in the case that it's a manual transmission, and on the shifter in an automatic. A broken Neutral Safety Switch can cause your vehicle to suddenly start in gear, causing vehicle damage or personal injury.

If you don't have the Neutral Safety Switch, your vehicle will fail to work. The Neutral Safety Switch is typically situated below the clutch of trucks which have a stick-shift transmission. The primary function of a Neutral Safety Switch is to stop your truck from starting when in gear. The car's Neutral Safety Switch acts as a safety feature, keeping you from starting the engine if the car is in gear. The Neutral Safety Switch is an electronic part which is essential while starting your car.Here's a link to what it look's like.

Test/Service/Replace Neutral Safety Switch
Most neutral safety switches are combinations of a neutral safety switch and a backup lamp switch. Others have separate units for these two distinct functions. When the reverse light switch is not part of the neutral safety switch, it seldom needs adjustment, as it is directly activated by the transmission or the gear selector linkage.
Typical location of a neutral safety switch on a transaxle. Reprinted with permission of Ford Motor Company. A neutral safety switch allows current to pass from the starter switch to the starter when the lever is placed in the P or N position. Some neutral safety switches are nonadjustable. If these prevent starting in the P or N position and the gear selector linkage is correctly adjusted, they should be replaced.
To adjust a typical neutral safety switch:

• Place the shift lever in neutral.
• Loosen the attaching bolts for the switch.
• Using the angling pin, move the switch until the pin falls into the hole in its rotor.
• Tighten the attaching bolts.
• Recheck the switch for continuity. If no voltage is present, replace the switch.
• The switch sometimes controls the operation of the back-up lights also. With the engine off and the key on, put the selector in reverse position. Check the back-up lights to see that they are on. Then, check in the drive position to see that they are out.

Safety Switch Most neutral safety switches are combinations of a neutral safety switch and a backup lamp switch. Others have separate units for these two distinct functions. When the reverse light switch is not part of the neutral safety switch, it seldom needs adjustment, as it is directly activated by the transmission or the gear selector linkage.
Typical location of a neutral safety switch on a transaxle. Reprinted with permission of Ford Motor Company. A neutral safety switch allows current to pass from the starter switch to the starter when the lever is placed in the P or N position. Some neutral safety switches are nonadjustable. If these prevent starting in the P or N position and the gear selector linkage is correctly adjusted, they should be replaced.
To adjust a typical neutral safety switch:

• Place the shift lever in neutral.
• Loosen the attaching bolts for the switch.
• Using the angling pin, move the switch until the pin falls into the hole in its rotor.
• Tighten the attaching bolts.
• Recheck the switch for continuity. If no voltage is present, replace the switch.
• The switch sometimes controls the operation of the back-up lights also. With the engine off and the key on, put the selector in reverse position. Check the back-up lights to see that they are on. Then, check in the drive position to see that they are out.

The neutral safety switch is located on the top and toward the base of the steering column almost to the floorboard.

To remove or install the neutral safety switch be sure to place the shifter in the neutral position, then dis-connect the wire connector at the neutral safety switch, then remove the securing screws and then remove the neutral safety switch.

Install the new neutral safety switch and do not over-tighten the securing screws, then remove the alignment pin and re-connect the wire connector to the neutral safety switch. (be sure not to remove the alignment pin until the neutral safety switch has been installed)

Check to be certain that the vehicle only starts in "Park" or "Neutral". Here is an image to help assist you, and let me know if you require any further assistance.

The neutral safety switch is located on the side of the transmission and it is usually attached behind the shifter linkage and it is secured with two small bolts that can be loosened up to allow for adjustment of the neutral safety switch.

To adjust the neutral safety switch place the transmission into neutral, (block the tires) there is a notch or and indent marker on the housing of the neutral safety switch that should be lined up with a line on the face of the collar that is around the shifter detent shaft, and if they are not in alignment then loosen the two bolts that secure the neutral safety switch and then turn the neutral safety switch until they are aligned and then tighten the securing bolts to the neutral safety switch, and then test the starter. If the starter fails to engage then either the neutral safety switch is faulty, the neutral safety switch has been by-passed all this time and the by-pass (I will usually find things like a paper clip shoved into the vehicles wire connector with electrical tape around it) has fallen out of the wire connector from the vehicle wiring harness, or the battery just went dead. if you have the neutral safety switch from the old transmission still available try using it to test the neutral safety circuit. I have provided you with an image to help assist you adjust the neutral safety switch.