Serpentine belt where can I find a diagram for a chrysler sebring sepentine belt routing

The belt diagram is here including a 3D schematic.

https://www.google.com/search?q=2008+chrysler+sebring+2.7+serpentine+belt+diagram

..

Jeff, Check the attached links for your 2.4 belt routing,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Repair Guides Engine Mechanical Components Accessory Drive Belts 2...
How to Change Serpentine Belt on 2002 Chrysler Sebring
http://www.serpentinebeltdiagram.com/serpentine-belt-diagram-2001-chrysler-sebring-4-cylinder-24-liter-engine-alternator-and-air-conditioner-with-dohc-engine-02236

If you can't find the diagram, you will need to draw out the routing direction of the old serpentine belt so that you can properly route the new serpentine belt around each pulley. or you can go to any auto parts store and they should be able to give you a diagram, or go to dealer to get a red out or diagram of your old belt. Good-Day!

follow this link , should help and will get additional advice
2003 Chrysler Sebring Serpentine Belt Routing and Timing Belt Diagrams

The Sebring came with 3 engines. Siince you said you had a V-6 which one?
V-6 3.0? or 2.7?

http://serpentinebeltdiagrams.com/2006-chrysler-sebring-2-7l/

http://serpentinebeltdiagrams.com/wp-content/uploads/2010/08/sebring-2006-e1296371284561.jpg

The links above are for the 2.7.

Thanks for choosing FixYa,
Kelly

we get asked this a lot and to save looking up every car that comes to this sight we now direct you to the gates web sight so you can down load the diagram book for your self and look up you make and model. so hear is the web sight.



http://www.doocu.com/pdf/search/gates+auto+belt+routing

go to this web sight and down load the belt book then look up your car and wa-la you have what you need.

http://www.doocu.com/pdf/search/gates+auto+belt+routing

here are a couple diagrams...




If you need anything else, let me know.

Go to; daycoproducts.com, click cars and trucks, then go to serpentine belt. Then on the right side of the screen click on finding your vehicle. Then get the illistration number and click on illistrations, go to that number it should something 6-? or 7-?. It's a pretty good websight.

On the underside of the hood (sometimes on the radiator shroud) there should be a decal showing the routing of the belt for the enging that came in the car originally.