Question about 2007 Toyota Camry

3 Answers

CD disk error

CD player doesn't read disk. An error comes up on the display stating ERROR CODE 1. I purchased a car CD player cleaner which is one of those disc with the small brushes attached and still the problem exist. What do you suggest would be my next step?

Posted by yiggla on

  • Marvin
    Marvin May 11, 2010

    YOU WILL NEED TO PULL THE UNIT OUT AND SEND IT IN FOR REPAIR NO MATTER THE CODE, TOYOTA DOESN'T SELL PARTS FOR THESE PLAYERS, THEY CAN BE REPAIRED AT AN AUTHORIZED REPAIR STATION ONLY

×

Ad

3 Answers

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 199 Answers

Ok error code 1, look for this error code on your owners manual, toyota cd players give 3 error codes, this mean error code 1, error code 2, and error code 3, they all have different meaning please check owners manuel to see what does error 1 mean i will try looking for you

Posted on May 26, 2009

  • mgodwin363
    mgodwin363 Mar 12, 2013

    The Owner's Manual only states what an Error is, NOT what the codes stand for. I just spent about 30 minutes going through the manual looking for codes. No dice.

×

Ad

alejo

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

How can i repair code 3 in the toyota sienna le 2004.. help please

Posted on Aug 16, 2013

Ad

wendy

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

The cd player wont let me eject the cds also keeps coming up code error year 2000 Altezza.

Posted on Dec 26, 2013

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a subaru legacy b4 2001 and it keeps reading disc error when I insert a compact disc in to the player. What could be causing it?


if your cd is an original and its in good working condition.
try a cleaning kit the laser might be dirty.
after that you might need to replace the unit. I have had a few of the single disc players go bad and I found a replacement at the wrecking yard
try this link to locate a replacement cd player
Car Part com Used Auto Parts Market

Dec 05, 2014 | 2001 Subaru Legacy

1 Answer

2006toyota rav4 cd player error 1


maybe the disk drive has gone bad

Oct 28, 2013 | 2006 Toyota RAV4

1 Answer

Navigation


try using a cd disk cleaner if that dont work the laser might be bad and need replaced.unless you have worked on a cd player before you will have to have a pro replace the laser of whole cd player.

Oct 20, 2013 | 2004 Acura MDX

1 Answer

CD player doesn't read and it displays disc/focus error check disc


most common cause is a dirty or bad optical pickup in the unit, it may be able to be cleaned but more common is the pickup is bad.

Dec 18, 2012 | 2007 Nissan Altima

1 Answer

Not reading CD discs in 2007 Grand Cheerokee


You can purchase a cd cleaner and try that first> the led that reads the cd is dirty> if this does't work you will have to remove the player and take it to a shop that will disassemble it and clean and repair it.

Mar 23, 2012 | Cars & Trucks

3 Answers

CD WILL NOT LOAD SAYS NO DISC IN PLAYER


You listed this in the auto section, so I'm not sure just where you have the problem. When you receive an error like this and you've tried several disks with the same result it means your CD player is bad and must be replaced.

Oct 01, 2011 | 2003 Ford Focus

1 Answer

When i try cd it keeps writing error.and reject every cd plates i insert.it was playing normal 2days ago.pls what do i do when error notice appear.the car is honda 2003 model coupe.thanx


Unfortunately 90% of the time when you get error codes from the CD player/changer it means that there is a mechanical failure in the CD player/changer unit itself and it usually requires CD player/changer rebuild or replacement...
First make sure you have entered the correct anti-theft code. If battery power has been disconnected recently than the stereo display will read CODE if the incorrect anti-theft code is entered the display will read ERR1 thru ERR3. If this is the case you'll have to get the correct anti-theft code. Note; If you enter the incorrect code three times the stereo locks up. Disconnect the battery for more than 30 seconds and then retry.
FYI;Never use adhesive labels or protective disc covers on recordable CD's. Recordable CD's are actually thicker than pre-recorded CD's. Automotive players and changers use rollers to draw the disc into the unit. The added thickness of an adhesive label or protective disc cover may cause the disc to jam. Also CD players and changers are exposed to high temperatures inside the vehicle. High temp will cause the labels adhesive to soften which may cause the labels edges to curl or cause it to bubble. Either one may cause the disc to jam. If the player can not be disassembled and have the discs removed successfully than it will have to be replaced. -hope this helps.

Oct 18, 2010 | 2003 Honda Accord

1 Answer

1998 Honda Accord EX stereo/CD player has Code E on the screen... What is the cause of this and what can I do to fix it?


Unfortunately 90% of the time when you get error codes from the CD player/changer it means that there is a mechanical failure in the CD player/changer unit itself and it usually requires CD player/changer rebuild or replacement...
First make sure you have entered the correct anti-theft code. If battery power has been disconnected recently than the stereo display will read CODE if the incorrect anti-theft code is entered the display will read ERR1 thru ERR3. If this is the case you'll have to get the correct anti-theft code. Note; If you enter the incorrect code three times the stereo locks up. Disconnect the battery for more than 30 seconds and then retry.
FYI;Never use adhesive labels or protective disc covers on recordable CD's. Recordable CD's are actually thicker than pre-recorded CD's. Automotive players and changers use rollers to draw the disc into the unit. The added thickness of an adhesive label or protective disc cover may cause the disc to jam. Also CD players and changers are exposed to high temperatures inside the vehicle. High temp will cause the labels adhesive to soften which may cause the labels edges to curl or cause it to bubble. Either one may cause the disc to jam and cause the player to display error codes E-01 thru E-07. If the player can not be disassembled and have the discs removed successfully than it will have to be replaced. -hope this helps.

Oct 18, 2010 | 1998 Honda Accord

1 Answer

The cd player on my 2002 gmc envoy reads 'player error'. How can it be fixed?


purchase an optical disc cleaner disc and put it in your cd player and let it play through and then try a cd. make sure your cds are clean, smudge and not deep scratches. toothpaste makes a good cd cleaner for scratched discs. make sure to use soft cloth

Jul 14, 2010 | 2002 GMC Envoy

1 Answer

What the E-20 showing on my cd player


Hello! The "E20" error code loosely means that the CD player cannot focus, or read the disc properly. This could be from a number of reasons, dirty pickup lens, dirty/scratched disc, excessive humidity, or using a burned/copied CD that was burned at a speed that was too fast to provide a "deep" enough burn to the disc. And lastly, I know GM's Delco radios in the late 90's had issues reading CD-RW's; but read CD-R's fine (if burned slow enough)

My first suggestion would be to see if this happens on all CD's - originals and/or burned ones. If it only happens on burned/copied discs - I'd recommend slowing down the burn speed to no faster than 16x and retrying. If it does happen with both types of discs, then I'd purchase a CD lense cleaner and run that through a couple of cycles.


Hope this helps and good luck! Thanks for using FixYa!

Sep 26, 2009 | 1997 Pontiac Bonneville

Not finding what you are looking for?
2007 Toyota Camry Logo

7,808 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14850 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...