Question about 2007 Proton Satria Neo

Key fob unlock door porsche remote - 2007 Proton Satria Neo

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

1 Answer

How do I reset the key fob for a 2000 porsche boxter

You can reintall your car system ,and look the isntrution to see if it can reprogram the key for you again .If it can't .maybe you have to buy a new one for your car.

Apr 06, 2013 | 2000 Porsche Boxster

1 Answer

How do I open the fuel filler door on a 2004 Porsche Boxster S when the battery in the key fob is dead?

Open the passenger side door, there is a small round pull cable directly behind the fuel filler door. Pull it GENTLY, about a quarter of an inch- it will unlock the fuel door. Pull it too hard and it will break.

Dec 14, 2012 | 2004 Porsche Boxster S

1 Answer

Both key fobs will not lock or unlock doors. Put new batteries in and still have the same problem. I can lock and unlock doors with the key, start the car but it seems like the remote is no longer...

hello there
i think you should call local dealer -they need to prgram your key

proporsche

Dec 18, 2010 | 1998 Porsche 911 Carrera

1 Answer

1999 porsche 996 replaced key fob battery disconnected battery now trunk releses are locked and cant access battery.How do you open frt trunk manually

Assuming the car battery is ok (if not, buy a male to male cigarette lighter at the auto store and connect to another car until charged enough to unlock the doors...but don't try to crank the ignition!). The trunks won't open if the battery went dead with the alarm set because arming the alarm physically locks the releases.

Sounds like the key code is switched off because you replaced the key fob battery. Try unlocking the car manual with the key in the door lock. Then switch the ignition on to reactive the keyless entry. If this does not work, you might also try pressing the fob unlock button with the key in the door lock until the dash led flashes.

Jun 10, 2010 | 1999 Porsche 911 Carrera

1 Answer

Porsche 2000 911 Carrera. Key fob problem

each vehicle is different put the key in the ign. turn key on press door lock/unlock at the same timehold button for 10 sec see if any lights on the dash inst. panel blink if they do that means that the key fob was programmed to your vehicle i recommend a new key fob this will give you definative instructions on how to reprogram your fob

May 04, 2010 | 2000 Porsche 911 Carrera

1 Answer

My Porsche Cayenne S Key fob no longer unlocks the doors wirelessly but does work on the ignition. I tried unlocking door manually then hitting unlock/lock button of fob and nothing (per the manual)...

unlock the door then press the lock button on remote and hold down for 20/30 secs.manual does say hold button.....

Mar 02, 2010 | 2005 Porsche 911

3 Answers

My Porsche Key fob no longer unlocks the doors

Insert key into door barrel or ignition lock and turn key, whilst doing this press the unlock/lock button, the led on the dash should flash to indicate this has initialised the key to the car, then remove key and test operation of remote. If this fails then a new remote plus coding to the car by your dealership is needed

Feb 16, 2010 | 2005 Porsche 911

1 Answer

Porsche boxster 1999 model keyfob not working. have replaced battery but still inoperable.what do i have to do to reprogram

i presume little led in fob flashes when button pressed. Key needs to be initialised. Put key in door lock or ignition barrel and press unlock button watching led on dash, this should flash. remove key from lock, remote should now work

Aug 29, 2009 | 1999 Porsche Boxster

1 Answer

1997 Porsche Carrera S --- Central Locking System Battery went dead while on travel and now the key fob for central locking is kaput! Is there a sequence to re-sync the fob to controller?

Hi,

Maybe you can try this procedure to resyn your key.
Initialization Procedure.

1. Open central locking system using the car key.
2. Get into the car and close all doors.
3. Using the car key, switch the ignition lock briefly to position "1" and then switch off again. (Please do this switching within 5 seconds or otherwise the system is not ready for initialization.
4. At the remote control key. Press the "OPEN" key (->) and keep holding.
5. When holding the "OPEN" key, press the "LOCK" button three time.
6. After pressing the "LOCK" button 3 times, release the "OPEN" button.
7. If the initialization process is sucessful, the door will lock and unlock immediately to confirm the process.

Jun 05, 2009 | 1997 Porsche 911

2 Answers