2007 Jeep Grand Cherokee Overland Logo

Related Topics:

A
Anonymous Posted on Jan 03, 2014

2007 jeep Cherokee grandly redo won't start after changing left tail light

5 Related Answers

Anonymous

  • 231 Answers
  • Posted on Dec 24, 2008

SOURCE: where is the fuse for the tail lights for jeep '96 grand cherokee

Unfortunately, could not find owners manual for 1996.

Website only has models 2004-current
=> http://www.jeep.com/en/owners/manuals/index.html

There are two fuse boxes. One under driver compartment usually left to the steering colum. A label is stamp to identify each fuse. I would look at Park Lights and Instrument Cluster fuses. The easy way is to take a flashlight and look at all fuses. If they are all okay. Then just remove the Park Lights and Instrument Cluster fuse and reseat them. The other fuse box is under the hood and near the batter. It also has a label to identify each fuse.

Ad

mohammed rahman

  • 64 Answers
  • Posted on Feb 15, 2009

SOURCE: tail light works but brake light does not

replace the brake light switch, but first check the bulb and fuses

Anonymous

  • 1 Answer
  • Posted on Feb 20, 2009

SOURCE: the tail lights are out, so the brake lights-Jeep Grand Cherokee

i have a 2002 jeep grand cherokee i had the same problem when i would apply my brakes when the headlights were on my brake lights would go out, i found that my bulbsocket was not making good contact with the socket housing, if you notice when you take off a bulb, look at the light fixture where you unscrewed your breaklight bulb you will notice 3 medal contacts-they should be silver in the socket housing and like a copper on the socket bulb, in the socket housing their should be 2 silver contacts together and 1 by itself the one that looks by itself is making bad contact with the copper one thats by itself on the bulb, what you can do for a quick fix is; get a small piece of low cage wire or a thin piece of metal like copper stick that in to the bottom or top of that metal contact--i did it through the bottom leave the wire or piece of medal sticking out enough for where it can get contact with the bulb (just a little wire is enough to make contact, now screw the bulb on and test it---it will work----i did it to mine, if you need more assistance let me know [email protected]

Anonymous

  • 1 Answer
  • Posted on Mar 08, 2009

SOURCE: how to change fog light bulb on 2004 jeep grand cherokee

There's a small space behind inside fender. You can get your hand in there to grab and twist the back of the bulb to release it. You need a flashlight.

Anonymous

  • 1071 Answers
  • Posted on Jul 23, 2009

SOURCE: 2003 Jeep Grand Cherokee check engine light stays

go to autozone they will check codes for free

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2008 Jeep Grand Cherokee; which fuse controls heater and a/c dashboard lights please?

Question edited to toss in some CAPS.

Question moved to model category.

Jeep Grand Cherokee (WK; 2005-2010) fuses and relays

https://fuse-box.info > jeep > jeep-grand-cherokee-wk-...

Here you will find fuse box diagrams of Jeep Grand Cherokee 2005, 2006, 2007, 2008, 2009 and 2010, get information about the location of the fuse panels ...

2008 Jeep Grand Cherokee fuse box diagram - StartMyCar

https://www.startmycar.com > ... > Fuse box

The 2008 Jeep Grand Cherokee has 3 different fuse boxes: ... Jeep Grand Cherokee fuse box diagrams change across years, pick the right year of your vehicle:.

2005-2010 Jeep Grand Cherokee WK Fuse Box Diagram

https://knigaproavto.ru > ... > Jeep > Grand Cherokee
Oct 7, 2019 - Fuse Box Layout Jeep Grand Cherokee; engine: 3.0L Deisel, 3.7L, 4.7L, 5.7L and 6.1L (WK; 2004, 2005, 2006, 2007, 2008, 2009, 2010)
0helpful
1answer

2007 Jeep Cherokee won't start. Had the ignition replaced did not help. Will start every now and then.

Is there any trouble codes stored in the PCM? If so, what are they. Engine light lit?
2helpful
2answers

2007 Jeep Grand Cherokee..tail ligts and blinkers do not work when headlights are on..they work otherwise..another problem when headlights or running lights are on and I use left blinker, it blinks...

mporteous, It sounds like you have a light switch problem. I can't think of any other reason for the running lights and tail lights not working in this situation. Are your brake lights working when the headlights are off and how about when they are on? Do your four ways hazard lights work in these situations? Try all the lights under these conditions. The reason the left turn signal blinks very fast is because one of the bulbs are burned out. Try the left signal and one light (front or back) will stay on and the other will not come on at all. Replace the bulb that does nothing. Do this before you try all the lights in different situations. I think that you will have to replace the light switch. Good luck with this.
0helpful
2answers

We have a 2000 jeep grand cherokee laredo. We have changed bulbs, replaced a socket, and the drivers side tail light dosen't work. The brake light, turn signal, and back up lights do. Only the left tail...

Check the fuses as well as the wiring near the tail light.

If all seems good, get a cheap multimeter and check the voltage in the wires that go to the tail light (red probe on one wire and black probe on the other). If you get a reading about 12 Volts (or -12 depending on which wires the black and red are on) the problem is the tail light or bulb itself.
0helpful
1answer

1997 Grand Cherokee: my 97 jeep cherokee won,t start had problem befor...

did you figure out what the problem was? Mine is doing the same thing and I think it is drainning the battery.
1helpful
1answer

94 Jeep Grand Cherokee Laredo: No power to left tail light

Traced the problem to the Lamp Outage Module located in the rear left quarter access panel behind the spare tire. Arcing had occurred on the left taillight line. Fortunately this part is readily available at your local Jeep recovery yard (none available in the U.S. from dealers). Recommend J& W Auto Wreckers in Antelope, CA (web site available). Massive number of Jeeps and fair prices. If you don't want to replace the LOM then you can join the two connectors that go into the LOM (LOM is optional) but you'll always show a lamp failure on your console.
0helpful
1answer

1998 Jeep Grand Cherokee Left Tail/Stop Light Inop.

You need to check for power and ground. If you dont have a volt meter you can get a good cheap one from radio shack. If there is no power recheck with a known good ground. All the lights on that side share a common ground. Check the sockets for signs of burning or corrosion. There is a plug in the left rear quater panell. If you have no power check the corrisponding wire at that connector. The wires splice togeter just before the connector. So if the other brake/tail light is working you know the problem is after that. Hope this helps. Im sure you'll find the problem.
3helpful
2answers

2002 jeep grand cherokee. Rear left brake light isnt working

The problem with your tail light is the housing is broken where the socket goes in. If you pull that socket out and look you will see the metal tap will be pushed down and the plastic around that will be broke. Easy fix is to replace the lens but you can get under the metal tap with a small flat tip screw driver and pull up on it very lightly and it should work for awhile.

Hope this helps
Cory
Not finding what you are looking for?

38 views

Ask a Question

Usually answered in minutes!

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...