Power windows and locks don't work - 1990 Mercury Topaz

the master window lock switch is stuck on the off possition test for power in and out, remove and replace

Try putting direct power to you're window motors and the power locks if everything moves and actuates, u can eliminate those items. also make sure you are getting power to you're switches, u may have a bad wire a bad connection or it may b grounded out. You could also just have a bad switches.

They are on two different circuits. The windows are on a 25amp circuit breaker, and the door locks are on a 20amp fuse.
The door locks go thru a central timer module but the windows don't.
Have you checked for power and ground at the driver's door switch ?

how do I clean contacts on power windows on a 1998 chrysler town and country

check for for broken wires where door hinges are at. pull back rubber boot and check them.

For all types of power window problem and power windows not working,i suggest you to go through the help links given below. Click the link to go through its procedure to troubleshoot the problem :------

Power window problem
http://repairhelpcenter.blogspot.com/2012/01/pontiac-grand-am-power-window-not.html
------------

Power windows not working after car wash?http://howtobyme.blogspot.com/2011/11/power-windows-not-working-after-car.html
---------

power locks, power window and power mirror not working?
http://howtobyme.blogspot.com/2011/09/power-locks-power-window-and-power.html
------------
All power windows not working?
http://howtobyme.blogspot.com/2011/09/all-power-windows-not-working-on-2003.html
------------
How to remove window motor and regulator on Volkswagen Car?
http://howtobyme.blogspot.com/2011/09/how-to-remove-window-motor-and.html
-------------

Complete Diagnosis & Testing Power Windows?

http://repairhelpcenter.blogspot.in/2012/02/diagnosis-testing-power-windows.html
-----------This will help.Thanks.

Window fuse's and relay's may be up under driver or passenger side dash or behind glove box, under the hood and even under the seats, and finally on the ends of the dash. All passenger power windows and locks are controlled thru and get power from the master control switch on the drivers door. Could be a broken wire in the rubber boot going from the door to the body. You will have to eliminate each till you find the culprit. Check that all switches return to neutral when released. It could also be the body control module.

your alternator may be controlled by the PCM, engine computer.

My power window fuse don't work. the window goes down never came up
Any one can help me de to it please ?

I have the same problem with my 2004 Jeep.I seen a lady last week opening her door on her cherokee to mail a letter, and asked her if her window and power locks don"t work, she said no.She said her mechanic said it was a module.I wonder if this is a faulty recall with Chrysler?