I have a 1999 Pontiac Grand Am without a dipstick to check the transmission fluid level how do I add the fluid to the transmission?
SOURCE: cant find where to add transmission fluid
on some of the newer cars they dont have dipsticks they have a plug near the pan that you have to pull on the trans to check the fluid level and to fill it there is a cap hidden on top of the trans by all the stuff you have to try to bend a funnel around to get in it. dont you love the engineers
SOURCE: checking transmission fluid level on 2005 c230 kompressor mb
what fluid did you want to check? oil, coolant, transmission, brake? let me know and maybe i can help. the leak you currently see what color is the fluid? black or dark brown probably enigne oil. red or dark brown probably some kind of hydraulic fluid--trans or brake, yellow, green or blue with a sickly sweet smell is probably coolant. i haven't worked on a c230 but as far as i know all transmissions have a dipstick where you can check the level. check your owner's manual. make sure the car is warmed up such as after a short drive to properly circulate and check the trans fluid. some cars also require the transmission to be placed in a specific position ie neutral when being checked. again check your owners manual.
to the guy that was critical about your question, i hope he stays as dumb and ignorant about his/her car as he seems as with his/her attitude--just keep bringing it to servcie, that way i can keep making a lot of money out of you. i actually prefer an owner who knows a litlte some thing about their car and how it works--it makes the job easier in communicating to me what may be wrong and thus i can save them time and money. we both win. just don't tell me what you think it is--just tell me the symptoms are, as a professional it's my job to figure it out from there. hope this helps.
SOURCE: adding transmission fluid to a 2002 pontiac grand prix se
I am not sure which engine you have on your 202 Grand Prix, but if you have the most common 3800 V6 this is where it should be. Look at the back of the engine compartment just to the left of the plastic master cylinder resevoir.
Here is a picture you can look at...
I hope I was able to assist you!
SOURCE: adding transmission fluid to 1992 BMW 525i.
On the driver side of the transmission pan there is a fill plug. The car must be in the air and level. With the car running fluid will run out of the plug hole when it is full. This is no fun without a lift.
SOURCE: how do you check/add transmission fluid to a 2004
Hello! To check the fluid level, the first thing you want to do is get the fluid to operating temperature, by driving it for a bit and letting it shift through all gears. Once you've done that you need to make sure you park the car on a very level surface. Remove the front passenger wheel and the splash guard. From there reference the picture below to give you an idea where the fluid check plug is located - there is no dipstick on this transmission (4T45e). You will also see the fill plug location.
If you do a pan drop and filter replacement only, the fill capacity is 6.9 quarts. You will want to use Dexron III type transmission fluid.
FYI - here are the torque specs for the pan bolts is 106 in/lbs and the check/fill plugs are both 124 in/lbs.
Hope this helps and good luck!
Testimonial: "i already found the info, but the answer is 100% cinsistant with the info i researched. thank you!!!! "
294 views
Usually answered in minutes!
×