Shivers and shakes while driving, and mashing gas pedal
Sounds LIke Drive Shaft is loose and Maybe bracket is Worn Out
SOURCE: 2000 ford windstar van belt diagram!!
There should Be a Factory Sticker under the Hood that gives you the Exact Routing. Check in the Back of the Owners Manual. If not let me Know!
SOURCE: ford winstar van
If your overdrive light is flashing and the transmission is not shifting properly, you most likely have diagnostic codes stored in the tranmission control module. These codes relate to a specific sensor/solenoid/actuator and can help in diagnosing your problem. You will need a scan tool to read these codes. You should also check your transmission fluid level to see if it is at recommended level (engine at normal operating temp). The fluid should be red in color, if it is very dark or brown/black in color and has a burnt smell to it, your transmission has internal damage and will need to overhauled.
A qualified transmission shop (Aamco, Lee Miles, Gibralter, etc.) would be your best bet.
Hope this helps.
SOURCE: where is the fuel pump
Hi you could download the Ford Windstar Owner's Manual
https://www.fleet.ford.com/maintenance/owners_manuals/default.asp
SOURCE: 2001 ford winstar van v6 eng wont start do to anti theft system is on how i turn it off
2001 widnstar won't do anything. Won't start, can't shift
SOURCE: i have a 2000 ford winstar with a code 1131 what
This has to do with your bank one O2 sensor. You may just need to clean it off, possible you may have to replace it.
203 views
Usually answered in minutes!
Hi linda raindrop, I want to help you with your problem, but I need more information from you. Can you please add details in the comment box? yes my van acts like it wants to cut off when I am driving it, and when I stop to stop lights and stop sign. I can also hear a sound like a rattling tension pulley.
the engine light comes on but doesn't stay on. Just took it to auto advance and codes they gave me were C1185, C1198, C1194. All codes to do with anti-lock brake malfunctions. What does these have to do with a shivering car. Power relay output circuit malfunction, system inlet valve coil left front, outlet valve coil left front. Why would this make it seem like it needs a tune-up
the engine light comes on but doesn't stay on. Just took it to auto advance and codes they gave me were C1185, C1198, C1194. All codes to do with anti-lock brake malfunctions. What does these have to do with a shivering car. Power relay output circuit malfunction, system inlet valve coil left front, outlet valve coil left front. Why would this make it seem like it needs a tune-up
the engine light comes on but doesn't stay on. Just took it to auto advance and codes they gave me were C1185, C1198, C1194. All codes to do with anti-lock brake malfunctions. What does these have to do with a shivering car. Power relay output circuit malfunction, system inlet valve coil left front, outlet valve coil left front. Why would this make it seem like it needs a tune-up
×