Question about Jaguar Cars & Trucks
Can I/How do I reset the maintenance required light on a 1994 XJ6VDP? How difficult is this task?
SOURCE: maitneance required light
Hi.. after you do this step come back and rate as fixya. OK..
Turn the ignitio key to run position
Push and hold for 5 seconds the Trip reset botom.
With the botom pushed turn the ignition key to OFF position.
Keeping pushed the botom.
Turn the Ignition switch to RUN position. keep pushed the trip botom for 10 seconds or untill you see the MAINT_Requi. go OFF.
Remember all this steps with the trip botom pushed. OK.
I hope this solve your question. Thank you for use fixya.
Posted on Aug 01, 2008
I have a 1995 dodge 2500 with a v10 and it runs rough at idle and the maintenance required light came on. I have tuned it up and replaced o2 sensors also profesionally cleaned the injectors and ran sea foam cleaner thru the intake and all vacum stuff besides egr valve or injectors wut can i do plus do i have to shut off the maintenance required light for the 02 sensors to work right
Posted on Sep 28, 2008
PRESS AND HOLD IN THE TRIPOMETER RESET BUTTON. WITH IT IN, TURN THE KEY TO THE ON POSITION WITHOUT STARTING THE ENGINE. THE DISPLAY WILL COUNT DOWN IN HASH MARKS FROM 6 TO 0. AFTER IT REACHES 0 RELEASE THE TRIPOMETER RESET, TURN THE KEY TO THE OFF POSITION. ONCE YOU RESTART THE LIGHT SHOULD BE OFF.
Posted on Dec 18, 2008
No its easy . here are the steps turn ignition to acc/ first turn hold reset button located next to odometer rest button. Hold this button for 30 seconds. then turn ignition to next turn/click where lights come on on the dash ex brake air bag etc. hold for another 30 seconds. The maintenance light should flash and go out start vehicle and your maintenance is done. Good luck ad thanks for using FIX YA
Posted on Mar 13, 2009
OK ON YOUR SPEEDOMETER, THERES TRIP A, TRIP B, AND THE REGULAR ODMO... U NEED TO PUT IT ON TRIP A (WITH THE KEY OFF) ONCE U GET IN ON TRIP A, PUSH AND HOLD THE BUTTON DOWN,WHILE HOLDING BUTTON DOWN TURN KEY ON, YOU WILL SEE LINES POP UP ON THE ODOMETER, (WHERE THE MILES ARE DISPLAYED) THEY WILL GO OUT ONE BY ONE, ONCE IT STATES 0 YOU ARE GOOD TO GO.. GOOD LUCK AND THANK YOU FOR USE FIXYA.COM..KEITH..
Posted on Mar 14, 2009
Tips for a great answer:
Sep 29, 2014 | 2007 Toyota Prius
Sit inside the driver's seat of the Honda Accord and close the driver's side door. Any interior lights on can prevent the maintenance required light from resetting properly on some year models.
Insert the key in the ignition.
Depress the odometer/trip button located beneath the odometer on the instrument panel. Hold the button down.
Turn the ignition key two clicks forward to the accessory power position. This is also known as the key-on/engine-off position.
Continue to hold down the odometer/trip button for up to 15 seconds until the maintenance required light goes out. On some Accord models, the maintenance required light may blink once before going out.
Release the odometer/trip button and then turn the ignition key to the off position.
Start the Honda Accord to ensure the maintenance required light is no longer illuminated on the instrument panel. If it still is, the reset procedure did not take and you'll need to repeat the procedure.
Apr 13, 2011 | Honda Civic Cars & Trucks
Dec 12, 2010 | 1994 Acura Integra
Jul 08, 2010 | 1994 Honda Accord
Jun 29, 2010 | 1994 Mitsubishi Montero
Oct 06, 2009 | 1994 Honda Accord
Feb 17, 2009 | 2005 Honda Accord
Jul 31, 2008 | Dodge Ram 350 Cars & Trucks
230 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: