Question about 1999 Honda Accord
Replaced the ecm,now it won't start. can i reset the ecm to my keys myself
yes you can replace it, more than likely I would try getting a replacement window from your local import salvage yard. you will need to remove the door panel screws (normally in the small pull compartment to close the door) and one in the latch, both have a plastic cap that needs to be pried up, it is also connected to the screw or bolt. next, you will need a flat blade screw driver or flat pry bar to take off the panel, start at the bottom. it should just pop out (loud snapping noise). In addition, there is a triangular shaped black plastic cap in the corner, that will also pry off. You will need to unplug the window and door lock connector, carefully remove the lining, you should be able to gain access to the two bolts that hold the window in place. you might have to raise or lower the door till you see them in the removal holes, should be a 10 mm socket. After you loosen remove old glass and install new one and re assemble as you have taken apart, Good Luck!!
Posted on Sep 11, 2009
SOURCE: 1999 honda accord clutch
Yes, I would get the dealership parts including the clutch plate, throw out bearing, and any other parts that seem to wear out when doing a clutch job on a Honda.
Get the service manual to learn specifically how to do this job.
Posted on Jul 13, 2010
Tips for a great answer:
Aug 10, 2013 | Cars & Trucks
May 21, 2013 | Cars & Trucks
Oct 02, 2012 | 1997 Honda Accord
Jun 07, 2012 | 1996 Honda Accord
Feb 05, 2011 | 1999 Honda Accord
Nov 26, 2010 | 2004 Honda Accord
Apr 18, 2010 | 1999 Honda Accord
Oct 03, 2009 | 1991 Honda Accord
Jan 24, 2017 | 1999 Honda Accord
58 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: