At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
what happens if you try to jump start it? do you hear the starter click? if you dont hear the starter click then you may have another problem also try putting the car in neutral instead of park and try to start it if this works than you need a neutral safety switch
what happens if you try to jump start it? do you hear the starter click? if you dont hear the starter click then you may have another problem also try putting the car in neutral instead of park and try to start it if this works than you need a neutral safety switch
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If the cluster on your 2007 Buick Lucerne CX 3.8 is showing "Drive" while the shifter says "Park" and the car won't start, there could be a few potential issues. Here are some troubleshooting steps you can try:
Check the shifter cable: The shifter cable connects the shifter to the transmission. If it is disconnected or broken, it can cause the shifter to not function properly. Check the cable and replace it if necessary.
Check the shift linkage: The shift linkage connects the shifter to the transmission. If it is disconnected or broken, it can cause the shifter to not function properly. Check the linkage and replace it if necessary.
Check the transmission range sensor: The transmission range sensor is responsible for detecting the position of the shifter and telling the engine control module (ECM) which gear the car is in. If it is malfunctioning, it can cause the car to not start or display incorrect gear information. Check the sensor and replace it if necessary.
Check the battery: A weak or dead battery can cause the car to not start or display incorrect information. Check the battery and replace it if necessary.
Contact a mechanic: If none of the above solutions work, it may be necessary to contact a mechanic for further assistance. They may be able to provide additional troubleshooting steps or arrange for a repair of your car if necessary.
Note: Before attempting any maintenance or repair work on your car, be sure to follow all safety precautions and refer to the owner's manual for guidance. Additionally, if you are not experienced with working on cars, it may be best to seek professional help.
It is unlikely that a Chevy Impala transmission can be directly installed in a 2007 Buick Lucerne CX 3.8, as they are two different vehicles with different transmissions. The Buick Lucerne uses the 4T65E transmission, while the Chevy Impala may have different transmission options depending on the year and model. Even if the transmissions have similar designs, there may be differences in the mounting points, electronics, and other components that would prevent a direct swap. It is always recommended to use the same transmission model that came with the vehicle, or to consult with a professional mechanic or transmission specialist for proper guidance.
Question edited for clarity, 'year make model' should be first as it is the most important piece of information and allows the site scipts to suggest the category.
Question moved from Misc to make model category.
The climate control is controlled from the Body Control Module. You will need an auto electrician with a pro grade scan tool computer to check the data network for the heater controls.
if drums retract brakes by adjuster in lower window then tap with a hammer, for rotors make sure that all locking hardware is removed ,some have a small screw holding them remove and tap with a hammer
what happens if you try to jump start it?
do you hear the starter click?
if you dont hear the starter click then you may have another problem
also try putting the car in neutral instead of park and try to start it if this works than you need a neutral safety switch
×