Rear speakers do not work

Be aware that you must choose a radio that is compatible with the trucks electronics or you will have electrical issues, don't cut the wires, use a plug and play adapter harness, you can get them plus info on the type radio you need from www.Crutchfield.com

Car Radio Battery Constant 12v+ Wire: Yellow/Red
Car Radio Accessory Switched 12v+ Wire: Run a wire to the steering column and use the dark blue/pink wire in the ignition switch harness.
Car Radio Ground Wire: Black/Orange
eft Front Speaker Positive Wire (+): Gray/Violet
Left Front Speaker Negative Wire (-): Gray/Yellow
Right Front Speaker Positive Wire (+): Dark Green/Violet
Right Front Speaker Negative Wire (-): Dark Green/Yellow
Left Rear Speaker Positive Wire (+): Gray/Dark Green
Left Rear Speaker Negative Wire (-): Gray/Light Green
Right Rear Speaker Positive Wire (+): Dark Green/Gray
Right Rear Speaker Negative Wire (-): Dark Green/Light Green

About 3,970 results (0.89 seconds) Search Results

Ford Bluetooth® Wiring Harness - Crutchfield

www.crutchfield.com/.../Ford-Bluetooth-Wiring-...

Crutchfield Corporation
Rating: 4.5 - ‎16 reviews - ‎$19.99 - ‎In stock
Reinstall the factory radio and mount the Bluetooth kit, and you're ready to go. ... 16Reviews ... harness so that I could hook up an aftermarket amp to my factory radio.... works like it's suppose to. says it doesn't work on an 09 Escape but had no .... I purchased this harness to install a parrot ck3100 in my 07 Ford Edge.Missing: pwm

70-5521 wiring harness for ford with 6 CD premium sub amp ...

? 4:30
https://www.youtube.com/watch?v=0jqNafnki0o
Aug 9, 2013 - Uploaded by codieraji
Metra 70-5521 Radio Wiring Harness for Ford 03-Up Amp FordPremium stereo radio 6 CD changer with sub amp inputs. ...16:47. How to wire an aftermarket radio / I Demo install with metra harness and antenna ... How to hook up stock amp/sub to aftermarket head unit "ford sport trac" - Duration: 3:01. Pat.Missing: parakeet ‎pwm ‎98

Car Stereo Wire Harnesses - Radio Wires for all Car Audio ...

www.installer.com/main.php?page=harness
Car Stereo Wire Harnesses - Car Stereo Installation Wiring - Stereo Harness ... If you

Go to the Crutchfield site and check just in case you are missing something. They probably sell the same radio and in a pinch you can call them and tell them you can't get it to work; someone should be able to help you out. They do offer great speakers and trim panels to make it look like a factory pro install too.

Pull the unit out from the dash and check the wires first. Most aftermarket untils have a two pair of holes on either side, use nails to insert into the holes and press to release the unit after you get the fascia off. Check the wires carefully. Try taking one of the rear speakers out and plug the connectors from a door panel speaker on it to see if the speaker is good. If the speakers are bad, replace them. Crutchfield sells replacements you know will fit properly. Check the ground wires too!

Check with CRUTCHFIELD. They have been good with helping me on this issue with other vehicles. Often this information can be found on their website or by calling their customer service line. They can also provide a harness at resonable prices that will allow you to adapt the factory wiring for aftermarket head units.

It is not recommended to cut the factory wire harness off as one day you or someone after you may want to reinstall the original unit.

Hi, my research indicates you can install a single din aftermarket head unit in the 2001 Yukon.
A couple of good websites to use are crutchfield and modifiedlife.
Crutchfields will identify exactly what adapters are needed, and modified life has the factory wire colors.
You will need an adapter to fill the space between the aftermarket stereo and the hole left by removing the factory head unit.
You will also need an antenna plug adapter.
I recommend you buy the wire harness pigtail to simplify the installation--this may or may not include the antenna plug adapter.
If you have onstar, you will need an additional adapter.
If you have steering wheel controls, you will need another adapter to keep those.
Keep the above things in mind when selecting a new aftermarket stereo, as you will need one that is compatible with steering wheel controls and onstar, if you have either of those and want them to continue to work with the new stereo.
Crutchfield has an link called "outfit my car" that takes you through a "Turbo tax" style questionaire and tells you what will work and what you will need. here is the link: http://www.crutchfield.com/App/Car/outfitmycar/MyCar.aspx

Assuming you have a base Yukon, here are your factory wire colors from modifiedlife.com:
2001 GMC Yukon Car Radio Wiring Schematic
Car Radio Battery Constant 12v+ Wire: Orange
Car Radio Accessory Switched 12v+ Wire: Yellow
Car Radio Ground Wire: Black
Car Radio Illumination Wire: Brown
Car Stereo Dimmer Wire: Gray
Car Stereo Antenna Trigger Wire: N/A
Car Stereo Amp Trigger Wire: N/A
Car Stereo Amplifier Location: N/A
Car Audio Front Speakers Size: N/A
Car Audio Front Speakers Location: N/A
Left Front Speaker Positive Wire (+): Tan
Left Front Speaker Negative Wire (-): Gray
Right Front Speaker Positive Wire (+): Light Green
Right Front Speaker Negative Wire (-): Dark Green
Car Audio Rear Speakers Size: N/A
Car Audio Rear Speakers Location: N/A
Left Rear Speaker Positive Wire (+): Brown
Left Rear Speaker Negative Wire (-): Yellow
Right Rear Speaker Positive Wire (+): Dark Blue
Right Rear Speaker Negative Wire (-): Light Blue

Please let me know if you have questions, and thanks for using FixYa.

go to crutchfield.com they have install videos

hi, the speakers dont have fuses, they run directly from the head unit, sounds like the head unit has a blown output, or the speaker has just given up, you can buy the removal keys from ebay, or most auto shops,( very cheap )..remove the unit, and try the speaker that is working on the wires of the speaker that isnt, this will tell you if its the speaker, or the unit

You need to attach the blue wire on the stereo harness to the blue and white wire on the car adapter harness. they installed a small amplifier to power the rear door speakers and unless you connect those two wires then the speakers will not work.

hi there. I am not sure about the speakers. But there is a wiring harness available for a aftermarket head unit. I have a '97 sentra the base model XE version. I have just put in an alpine head unit and you defenately hear the difference even on factory speakers. But you will need 2 kits to install an aftermarket head unit in the car. 1. A dash kit. I got mine from canadian tire for about 20 bucks, it comes with instructions on how to put it together and its straight forward, just make sure u get the one for your year and make of car.

2. The wiring harness. there available at mostly every car audio place for about 10 bucks. again make sure u get the one for your year make and model of car. installing this is difficult so unless your good at electronics get it professionally installed. you have to splice the wires into the back of the aftermarket unit, then the plugs plug right into your existing factory car harness.

hope this solves your problem, the dash kit is easy to put together and install into the car, but the wiring harness is a bit difficult, i had my harness installed for about 40 bucks and u save money if u put the dash kit togehter yourself because thats 1 less thing they have to do. good luck.