At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: how troubleshoot ignition exchange computer fault?
DON'T KNOW WERE U GOT IGNITION LOCK & KEY.THE KEY HAS A BLACK DIODE IN IT THAT THE SECURITY SYSTEM READS.ONCE IT SEES THE CORRECT RESISTANCE THEN IT WILL START.U NEED TO TAKE TO OLD KEY TO THE DEALER AND HAVE THEM GIVE U THE CORRECT IGNITON LOCK CYLINDER AND KEYS
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Get a second ignition key, the one you are using is dirty or moisted, you need to turn on and off the car witha clean key, hapens to me once in a while.!!
the 1993 chevy caprice had a 5.7 engine with distributor in which you need to adjust ignition timing with a timing light.the 1994 - 1996 vechicle timing controlled by pcm, your problem does sound like timing off.
have you recently changed wheels or tire size? that is a definite change to speed. it changes everything about speed,stopping distance,control of car,handling conditions,when you go up to 18in or 20in 22in 24in rims or tires it changes the whole handling of the car. maybe you bought it that way,look at tire size,your car should come from factory with 15inch rims and tires max. any changes to that increases the speed.thank you for choosing fixya.com
There is no digital display for ODB I ...the check engine light will blink a series of flashes to provide a code for the fault. Check the link for the video that explains how to retrieve fault codes.
your resistor chip on your VATS key make look fine but there are also contacts just inside your key way on your ignition that work with your key to make the connection to the cars computer allowing it to read the resistors value and if it matches, allows to car to start, if it does not make proper contact some time, it will not read the key and car will not start, probably you need to have the ignition replaced.......
Only thing you can do yourself is to pull off the connector on the computer and check pins for corrosion. If you can get another computer on "loan" you might try plugging it in. though its somewhat rare (it should be) computers do fail. On older cars you can likely get a replacement in any scrap yard. sorry I can't help more, but with no readings, everything points to what I've said. You should also check ignition switch to amke sure power is coming out of there to remainder of system.
WELL I HAD THE SAME PROB. ON A 95 CHEVY CAPRICE.I REMOVED THE IGNITION AND THE WIRE WAS BROKE.WHEN U TURN THE KEY THE PASS KEY WIRE TURNS WITH THE IGNITION,WHAT A FAULTY DESIGN.ANY HOW BUY A NEW IGNITION AND KEY THAT SHOULD SOLVE THE PROB. GOOD LUCK
×