Question about 2003 GMC Yukon XL
SOURCE: 2003 YUKONXL 2ND SEAT DOES NOT SLIDE ON TRACK,
It sounds like one or more of the release cables came undone from your lever. Lift the lever, inspect all around it, look under the seat where the track is. There should be a small round cable that runs from your handle down to the release. Also there may be a thin wire that runs from the left side to the right side. If you find it and reconnect it you should be golden.
Good Luck!
Posted on Dec 14, 2008
SOURCE: removing the 2nd and 3rd row seats
3rd row, you simply pull the lever which makes the back fold down and then grip the handle located on the bottom and pull toward you slightly hard. They are heavy so it seems like they aren't coming out, just pull hard. second row, you flip all the way up and push with them standing up and they come unhooked. Good Luck! I didn't have any problems, except they are at least 50+lbs!
Posted on Jan 07, 2009
SOURCE: removing seats from 2002 yukon xl
I found a Owner's manual online...I can email it to you. I have it in an Adobe file.
Jason
[email protected]
Posted on Jan 12, 2009
SOURCE: how do I remove the headreast from 2nd row seats 01 gmc yukon
the button on the side there the bar pulls out from isn't just for puting the head rest down it is also for removal
Posted on Jan 02, 2010
SOURCE: Our 2007 Yukon XL's third
try to look under it for the cheap *** piece of wire or spring they use to connect the lock levers to the handle.
Posted on May 13, 2011
1,900 views
Usually answered in minutes!
×