Question about Honda CR-V

Open Question

Honda crv 4wd not working

Front wheels spin back wheels don't engage

Posted by Anonymous on

Ad

5 Related Answers

Anonymous

  • 239 Answers

SOURCE: HOWLING NOISES

Did you check your Transmission fluid and your differential fluids make sure there up and I don't know if you checked your rear wheel bearings or not, You can usually tell a wheel bearing when you are driving the car at highway speeds and you go around a corner and it get quite a bit louder Depending on what way you are turning if your turning right and it gets louder it will usually be the right side front or rear. the left usually the left front or back. some cases I have even heard Axles making a Howling Noise. Please let me know what you come up with. And Thanks in advance If I helped you out any. Bear001

Posted on Jun 17, 2008

Ad

Anonymous

  • 188 Answers

SOURCE: 98 4runner 4wd hi wont engage

Check you fuse panel to see if you have a fuse blowed???? If not, my father have to instal a new motor that switches itno gear????

Posted on Feb 07, 2009

Ad

Anonymous

  • 1 Answer

SOURCE: my 4wd does not work

you have a vacume hose that has a switch on it that engauges the diffy up front.you can find it by following the hoses of the diff case up to the intake of the motor.thats what makes the diffy connect with the transfer case.there is 2 hoses one a vent and the other a vacume.if the hose got poped off its not going to engauge.the vac hose comes in at the bottom of your diffy.try that mate,hope it helps.

Posted on Mar 05, 2009

john barone

  • 59 Answers

SOURCE: 4wd will not engage on 2002 gmc sierra 1500

try going into reverse for 10 feet then go to drive for 10 feet that might help if not it is to the wiring to you 4x4 engage system (wires to your wheel hub)

I’m happy to assist further over the phone at https://www.6ya.com/expert/john_2c7bb9c157d0baa8

Posted on Jul 04, 2009

Anonymous

  • 17 Answers

SOURCE: front axle does not engage when I shift into 4wd

http://www.fixya.com/cars/t2084504-4wd_wont_work_1999_chevy_tracker_but

If you tracker doesn't require you to be in park or neutral when engaging 4 wheel drive then please try the link above.

Posted on Dec 21, 2009

Testimonial: "seems to be right on"

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have 2003 f150 4wd light on but will not lock in


IF you have both front wheels in the air then either wheel will spin freely unless you have diff lock or limited slip diff. That is the nature of a diff..wd means that all 4 wheels drive but only when you have a limited slip diff or a diff locker. in action . If you have both of one side wheels in a bog you will not go any where.

Jan 05, 2014 | Cars & Trucks

1 Answer

4wd not engaging. Check actuator and seems to working properly. Jacked front end up and and when in 4wd the front tires spin freely. Any suggestions?


Does the driveshaft for the front wheels turn when in 4wd? The actuater might work but the diff lock for the front wheels might have broken. If the front driveshaft does not turn when in 4wd, the transfer case might be the problem.

Jan 02, 2014 | 2008 Chevrolet Silverado 2500HD

1 Answer

Hi.! I bought a Honda cr-v model 2003 and did not have manual book,how cal i tell if its two wheel drive or front wheel drive.is there an indication where can i look? Thanks..


Depends on the model, if it is all wheel drive it should have AWD on the back window.
The Honda CRV uses very smart technology to have AWD. Let me explain it simply. The CRV is essentially a front wheel drive car, but there are sensors mounted on all the tires that sense slipping. If the computer determines the wheel is spinning faster than the other ones, it uses hydraulics to engage the rear end differential and presto..All Wheel Drive. You do nothing, no switches, no levers, the computer does it all for you. If it is indeed AWD, you can look under the car to see if you have a driveshaft going into the rear differential (axle)

Please vote if this helped! Thanks, Mike

Jun 12, 2011 | 2003 Honda CR-V

1 Answer

My 4x4 won't engage in the hi function. lights flash when buttons are pushed. Lo will engage only when in neutral. Thanks Don


The Lo is working properly by requiring to put it in neutral but are you sure the front wheels spin? I would first check the 4wd actuator on the front diff & make sure thats working. You will need 2 people for this. One laying under the diff & watching/listening and the other pushing the buttons

Jan 10, 2011 | 2004 Chevrolet S-10

2 Answers

Are all honda crv models 4wd, and how would i no


look under rear of car, 4wd will have rear axles, crv is a front wheel drive

Dec 31, 2010 | Honda CR-V Cars & Trucks

1 Answer

2003 f150 crew 4wd Lost 4WD tranfer case locks


Lift and support the front of the truck so the front wheels are off the ground.
Key on, engage 4x4 and try to turn the front drive shaft.
If it turns it is a problem with the transfer case.
If it doesn't it is a front axle engagement problem.

Nov 30, 2009 | 2005 Ford F-150

3 Answers

Is Honda CRV cars four wheel drive?


Hi

The CRV is produced in both front wheel drive and four wheel drive versions. However in UK and Australia it is only available as a 4 WD as the front wheel drive option is not available in these countries.

The answer to your question therefore is that it is produced in both 2 WD and 4 WD but is dependant on what country you live in and the model variant.

Hope this helps. Please do rate my answer. Thanks.

Aug 04, 2009 | 2009 Honda CR-V

1 Answer

All time 4WD doesn't engage


transfer case has bad solenoid or controller

Feb 22, 2009 | 1999 Jeep Cherokee 4WD

1 Answer

Chevy Tahoe 2001


Place vehicle in 4wd (high or low). This will hold the front drive shaft still for the rest of the test. Jack up the front end of the vehicle. Remove the actuator. Have a buddy spin the right front wheel while you use a long punch or screwdriver to try to manually engage the diff. The left front wheel should spin in the other direction if the diff is good. Also before you check the diff you need to grab the front driveshaft and make sure it is locked, If it spins freely when the truck is in park and in 4wd with the front end raised then problem is in transfer case. If you can't make the diff engage manually with punch then the problem is in the diff. If front diff engages manually then the problem is the actuator. Hope this helps..

Nov 25, 2008 | Chevrolet Tracker Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14850 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...